To maximize power output in vehicular petrol engines, the air-fuel ratio is typically set around_________________?
Show answer Hide answer
Answer: B. 12 : 1
Explanation
A rich air-fuel ratio of approximately twelve to one provides surplus fuel ensuring complete oxygen consumption. This condition releases maximum thermal energy within the combustion chamber, generating peak cylinder pressure and engine torque. Combustion flame speeds increase under slightly rich mixtures, optimizing energy release timing during heavy loads. The chemically correct stoichiometric air-fuel ratio for standard petrol is roughly fourteen point seven to one. Providing less air than stoichiometric creates a rich mixture necessary for high-load or cold-start operations. Modern electronic fuel injection systems dynamically adjust fuel delivery to match desired power or efficiency targets.
Lean ratios such as fifteen to one prioritize fuel economy over power production, causing lower engine output. Extremely rich mixtures below nine to one cause severe engine flooding, incomplete combustion, and heavy soot formation. Very lean mixtures lead to misfires, engine hesitation, and excessively high combustion temperatures damaging internal components.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Diesel fuel differs from petrol by being_________________?
Show answer Hide answer
Answer: C. more difficult to ignite
Diesel fuel requires a much higher self-ignition temperature than petrol to begin combustion properly. The lower volatility of diesel fuel means it does not vaporize as easily at ambient temperatures. These chemical and...
Q2. All thermal engines make use of_____________________?
Show answer Hide answer
Answer: A. low heat value of oil
Performance calculations and thermal efficiency ratings of thermal engines utilize low heat value fuel data. Low calorific value excludes the latent heat of vaporization of water formed during combustion. Because engine...
Q3. Crankcase explosions in internal combustion engines typically stem from___________________?
Show answer Hide answer
Answer: A. first a mild explosion followed by a bi explosion
Crankcase explosions typically initiate with a minor primary explosion that rapidly stirs up lingering flammable oil mist. The initial mild explosion creates sufficient pressure waves and turbulence to trigger a catastro...
Q4. Fuel oil flash point refers to__________________?
Show answer Hide answer
Answer: A. minimum temperature to which1 oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in contact with a flame
Flash point is the lowest temperature where fuel oil releases enough vapor to ignite near a flame. It indicates the volatility and fire safety hazard level of liquid hydrocarbon fuels. Option A correctly defines the mini...
Q5. Diesel engines can operate on lean mixtures up to 30:1; petrol engines can achieve similar lean operation provided__________________?
Show answer Hide answer
Answer: C. can not work as it is impossible
Conventional spark-ignition petrol engines cannot operate on extremely lean mixtures like 30 to 1. Combustion stability breaks down entirely when the air-fuel ratio becomes too lean in petrol engines. Severe engine misfi...
Q6. Fuel consumption guarantees for I.C. engines generally rely upon__________________?
Show answer Hide answer
Answer: B. high heat value of oil
Fuel consumption guarantees for internal combustion engines are traditionally based on high heat value. Gross calorific value provides a conservative and standardized baseline for commercial engine warranties. Standardiz...