All thermal engines make use of_____________________?
Show answer Hide answer
Answer: A. low heat value of oil
Explanation
Performance calculations and thermal efficiency ratings of thermal engines utilize low heat value fuel data. Low calorific value excludes the latent heat of vaporization of water formed during combustion. Because engine exhaust gases remain well above condensation temperatures, exhaust water leaves as vapor. Net calorific value represents the true thermal energy available when combustion products stay gaseous. Thermal efficiency formulas divide useful work output by total fuel energy input based on net values. Exhaust temperatures in internal combustion engines prevent water vapor condensation inside cylinders.
Engine manufacturers calculate brake thermal efficiency using the lower heating value of diesel or gasoline. Power plant performance testing requires net calorific value to accurately reflect actual energy conversion. Thermodynamic cycle analysis assumes fuel energy input corresponds to the lower heating value standard. Option B is incorrect because high heating value includes latent heat that engines cannot recover from exhaust. Option C is redundant since net calorific value and low heat value refer to the exact same metric. Option E is incorrect because high heating value is not used for standard thermal engine performance.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Centrifugal pumps achieve peak efficiency when their impeller blades are_________________?
Show answer Hide answer
Answer: C. bent backward
Centrifugal pumps achieve peak hydraulic efficiency and stable performance when their impeller blades curve backward. Backward curved blades produce a drooping head-capacity characteristic that prevents flow surging inst...
Q2. A medium specific speed turbine indicates that it is___________________?
Show answer Hide answer
Answer: B. Francis turbine
Francis turbines operate effectively within a moderate range of specific speeds bridging high-speed and low-speed designs. The specific speed calculation for this reaction turbine yields intermediate values typical of mi...
Q3. Internal combustion engines operate at compression ratios of___________________?
Show answer Hide answer
Answer: A. the ratio of volumes of air in cylinder before compression stroke and after compression stroke
Compression ratio measures the geometric volume change inside an engine cylinder during compression. It compares total cylinder volume at bottom dead center to clearance volume at top dead center. Option A accurately def...
Q4. Compression losses in internal combustion engines arise due to_________________?
Show answer Hide answer
Answer: E. all of the above
Compression losses in internal combustion engines arise from any leakage path or geometric volume increase. Worn piston rings allow cylinder gases to blow past into the crankcase, reducing effective compression pressure....
Q5. To maximize power output in vehicular petrol engines, the air-fuel ratio is typically set around_________________?
Show answer Hide answer
Answer: B. 12 : 1
A rich air-fuel ratio of approximately twelve to one provides surplus fuel ensuring complete oxygen consumption. This condition releases maximum thermal energy within the combustion chamber, generating peak cylinder pres...
Q6. Does supplying scavenging air at densities above atmospheric imply that an engine is supercharged ?
Show answer Hide answer
Answer: A. yes
Supplying scavenging air at a density above atmospheric is precisely what supercharging means, so the answer is yes. The air is compressed before it enters the cylinder, so each charge contains more oxygen and can burn m...