Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57352

Crankcase explosions in internal combustion engines typically stem from___________________?

Select your answer for: Crankcase explosions in internal combustion engines typically stem from___________________?
Show answer

Answer: A. first a mild explosion followed by a bi explosion

Explanation

Crankcase explosions typically initiate with a minor primary explosion that rapidly stirs up lingering flammable oil mist. The initial mild explosion creates sufficient pressure waves and turbulence to trigger a catastrophic secondary explosion event. Hot engine components inside the crankcase provide the necessary ignition source for the vaporized lubricating oil mixtures. Crankcase explosions occur when lubricating oil overheats and vaporizes into an explosive mist within confined engine enclosures. Large marine and stationary internal combustion engines are always fitted with spring loaded crankcase relief valves for safety. Preventing severe crankcase failures requires careful monitoring of main bearing temperatures and routine lubrication maintenance schedules.

Option B reverses the sequence by incorrectly claiming a big explosion happens before the initial mild primary event. Option C is wrong because the primary and secondary explosions happen sequentially rather than occurring at the exact same moment. Options D and E are incorrect because these hazardous phenomena are well documented and definitely occur under specific fault conditions.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. A medium specific speed turbine indicates that it is___________________?

Select your answer for: A medium specific speed turbine indicates that it is___________________?
Show answer

Answer: B. Francis turbine

Francis turbines operate effectively within a moderate range of specific speeds bridging high-speed and low-speed designs. The specific speed calculation for this reaction turbine yields intermediate values typical of mi...

Q2. Internal combustion engines operate at compression ratios of___________________?

Select your answer for: Internal combustion engines operate at compression ratios of___________________?
Show answer

Answer: A. the ratio of volumes of air in cylinder before compression stroke and after compression stroke

Compression ratio measures the geometric volume change inside an engine cylinder during compression. It compares total cylinder volume at bottom dead center to clearance volume at top dead center. Option A accurately def...

Q3. Diesel fuel differs from petrol by being_________________?

Select your answer for: Diesel fuel differs from petrol by being_________________?
Show answer

Answer: C. more difficult to ignite

Diesel fuel requires a much higher self-ignition temperature than petrol to begin combustion properly. The lower volatility of diesel fuel means it does not vaporize as easily at ambient temperatures. These chemical and...

Q4. To maximize power output in vehicular petrol engines, the air-fuel ratio is typically set around_________________?

Select your answer for: To maximize power output in vehicular petrol engines, the air-fuel ratio is typically set around_________________?
Show answer

Answer: B. 12 : 1

A rich air-fuel ratio of approximately twelve to one provides surplus fuel ensuring complete oxygen consumption. This condition releases maximum thermal energy within the combustion chamber, generating peak cylinder pres...

Q5. Does supplying scavenging air at densities above atmospheric imply that an engine is supercharged ?

Select your answer for: Does supplying scavenging air at densities above atmospheric imply that an engine is supercharged ?
Show answer

Answer: A. yes

Supplying scavenging air at a density above atmospheric is precisely what supercharging means, so the answer is yes. The air is compressed before it enters the cylinder, so each charge contains more oxygen and can burn m...

Q6. Fuel oil flash point refers to__________________?

Select your answer for: Fuel oil flash point refers to__________________?
Show answer

Answer: A. minimum temperature to which1 oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in contact with a flame

Flash point is the lowest temperature where fuel oil releases enough vapor to ignite near a flame. It indicates the volatility and fire safety hazard level of liquid hydrocarbon fuels. Option A correctly defines the mini...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test