Diesel fuel differs from petrol by being_________________?
Show answer Hide answer
Answer: C. more difficult to ignite
Explanation
Diesel fuel requires a much higher self-ignition temperature than petrol to begin combustion properly. The lower volatility of diesel fuel means it does not vaporize as easily at ambient temperatures. These chemical and physical properties combine to make diesel fuel significantly more difficult to ignite. Diesel fuel consists of heavier hydrocarbon molecules compared to lighter fractions found in standard petrol. Self-ignition temperature is the minimum temperature required for a substance to self-ignite without a spark. Volatility measures how readily a liquid substance vaporizes into a gaseous state under normal conditions.
Diesel engines rely on high compression heating to initiate fuel ignition rather than an electric spark. Understanding fuel volatility is crucial for ensuring safe handling and efficient cold-weather engine starting. Automotive engineers must design combustion chambers specifically tailored to the ignition characteristics of the fuel. Option A suggests diesel is easier to ignite, which directly contradicts its high self-ignition temperature. Option B incorrectly claims diesel and petrol share the exact same ignition difficulty level. Option D describes diesel as highly ignitable, whereas it actually has lower volatility than petrol.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Combustion processes in compression-ignition engines are____________________?
Show answer Hide answer
Answer: B. heterogeneous
Combustion in compression ignition engines is heterogeneous because fuel is injected directly into compressed air spray pockets. The injected liquid fuel droplets must mix with air inside the cylinder before chemical rea...
Q2. Centrifugal pumps achieve peak efficiency when their impeller blades are_________________?
Show answer Hide answer
Answer: C. bent backward
Centrifugal pumps achieve peak hydraulic efficiency and stable performance when their impeller blades curve backward. Backward curved blades produce a drooping head-capacity characteristic that prevents flow surging inst...
Q3. A medium specific speed turbine indicates that it is___________________?
Show answer Hide answer
Answer: B. Francis turbine
Francis turbines operate effectively within a moderate range of specific speeds bridging high-speed and low-speed designs. The specific speed calculation for this reaction turbine yields intermediate values typical of mi...
Q4. Crankcase explosions in internal combustion engines typically stem from___________________?
Show answer Hide answer
Answer: A. first a mild explosion followed by a bi explosion
Crankcase explosions typically initiate with a minor primary explosion that rapidly stirs up lingering flammable oil mist. The initial mild explosion creates sufficient pressure waves and turbulence to trigger a catastro...
Q5. Compression losses in internal combustion engines arise due to_________________?
Show answer Hide answer
Answer: E. all of the above
Compression losses in internal combustion engines arise from any leakage path or geometric volume increase. Worn piston rings allow cylinder gases to blow past into the crankcase, reducing effective compression pressure....
Q6. To maximize power output in vehicular petrol engines, the air-fuel ratio is typically set around_________________?
Show answer Hide answer
Answer: B. 12 : 1
A rich air-fuel ratio of approximately twelve to one provides surplus fuel ensuring complete oxygen consumption. This condition releases maximum thermal energy within the combustion chamber, generating peak cylinder pres...