Compression losses in internal combustion engines arise due to_________________?
Show answer Hide answer
Answer: E. all of the above
Explanation
Compression losses in internal combustion engines arise from any leakage path or geometric volume increase. Worn piston rings allow cylinder gases to blow past into the crankcase, reducing effective compression pressure. Thick head gaskets and bearing wear increase clearance volume, lowering overall cylinder compression pressures. Engine compression pressure tests diagnose internal mechanical wear and sealing integrity problems. Volumetric and thermal efficiencies depend heavily on maintaining designed cylinder compression ratios. Carbon deposits and clogged intake slots also restrict airflow and degrade overall engine breathing capacity.
Automotive mechanics perform compression tests using pressure gauges to evaluate engine mechanical health. Overhauled engines require precise gasket thicknesses to restore original compression ratio specifications. Fleet maintenance programs monitor blow-by gases to detect worn piston rings before catastrophic failure. Leaking piston rings alone contribute to compression loss but do not account for all possible mechanical causes. Thick head gaskets increase clearance volume independently of ring wear or intake blockages. All of the listed options correctly contribute to overall compression losses in internal combustion engines.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Internal combustion engines operate at compression ratios of___________________?
Show answer Hide answer
Answer: A. the ratio of volumes of air in cylinder before compression stroke and after compression stroke
Compression ratio measures the geometric volume change inside an engine cylinder during compression. It compares total cylinder volume at bottom dead center to clearance volume at top dead center. Option A accurately def...
Q2. Diesel fuel differs from petrol by being_________________?
Show answer Hide answer
Answer: C. more difficult to ignite
Diesel fuel requires a much higher self-ignition temperature than petrol to begin combustion properly. The lower volatility of diesel fuel means it does not vaporize as easily at ambient temperatures. These chemical and...
Q3. All thermal engines make use of_____________________?
Show answer Hide answer
Answer: A. low heat value of oil
Performance calculations and thermal efficiency ratings of thermal engines utilize low heat value fuel data. Low calorific value excludes the latent heat of vaporization of water formed during combustion. Because engine...
Q4. Does supplying scavenging air at densities above atmospheric imply that an engine is supercharged ?
Show answer Hide answer
Answer: A. yes
Supplying scavenging air at a density above atmospheric is precisely what supercharging means, so the answer is yes. The air is compressed before it enters the cylinder, so each charge contains more oxygen and can burn m...
Q5. Fuel oil flash point refers to__________________?
Show answer Hide answer
Answer: A. minimum temperature to which1 oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in contact with a flame
Flash point is the lowest temperature where fuel oil releases enough vapor to ignite near a flame. It indicates the volatility and fire safety hazard level of liquid hydrocarbon fuels. Option A correctly defines the mini...
Q6. Diesel engines can operate on lean mixtures up to 30:1; petrol engines can achieve similar lean operation provided__________________?
Show answer Hide answer
Answer: C. can not work as it is impossible
Conventional spark-ignition petrol engines cannot operate on extremely lean mixtures like 30 to 1. Combustion stability breaks down entirely when the air-fuel ratio becomes too lean in petrol engines. Severe engine misfi...