Fuel oil flash point refers to__________________?
Show answer Hide answer
Answer: A. minimum temperature to which1 oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in contact with a flame
Explanation
Flash point is the lowest temperature where fuel oil releases enough vapor to ignite near a flame. It indicates the volatility and fire safety hazard level of liquid hydrocarbon fuels. Option A correctly defines the minimum temperature required to produce momentary vapor ignition. Flash point testing involves heating a closed oil sample and introducing a test ignition flame. Unlike fire point, flash point does not sustain continuous burning after the ignition source is removed. Fuel storage regulations are strictly based on minimum flash point temperature ratings.
Marine engineers check fuel oil flash points to ensure safe bunker storage aboard vessels. Industrial heating boilers require specific fuel flash points to prevent accidental furnace explosions. Transporting flammable liquid fuels requires certified flash point documentation for safety compliance. Option B describes the pour point or solidification temperature of the fuel oil. Option C defines the auto-ignition temperature where fuel catches fire without an external spark. Option D refers to distillation curve characteristics rather than vapor ignition temperatures.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Crankcase explosions in internal combustion engines typically stem from___________________?
Show answer Hide answer
Answer: A. first a mild explosion followed by a bi explosion
Crankcase explosions typically initiate with a minor primary explosion that rapidly stirs up lingering flammable oil mist. The initial mild explosion creates sufficient pressure waves and turbulence to trigger a catastro...
Q2. Compression losses in internal combustion engines arise due to_________________?
Show answer Hide answer
Answer: E. all of the above
Compression losses in internal combustion engines arise from any leakage path or geometric volume increase. Worn piston rings allow cylinder gases to blow past into the crankcase, reducing effective compression pressure....
Q3. To maximize power output in vehicular petrol engines, the air-fuel ratio is typically set around_________________?
Show answer Hide answer
Answer: B. 12 : 1
A rich air-fuel ratio of approximately twelve to one provides surplus fuel ensuring complete oxygen consumption. This condition releases maximum thermal energy within the combustion chamber, generating peak cylinder pres...
Q4. Fuel consumption guarantees for I.C. engines generally rely upon__________________?
Show answer Hide answer
Answer: B. high heat value of oil
Fuel consumption guarantees for internal combustion engines are traditionally based on high heat value. Gross calorific value provides a conservative and standardized baseline for commercial engine warranties. Standardiz...
Q5. Gaseous fuel guarantees are established based on___________________?
Show answer Hide answer
Answer: B. low heat value of oil
Gaseous fuel guarantees are conventionally established using the low heat value of the gas to ensure consistent performance standards. The low heat value excludes the latent heat of vaporization of water vapor formed dur...
Q6. Why is an excessive sulphur content in diesel fuel considered undesirable______________?
Show answer Hide answer
Answer: D. detonation
Excessive sulphur content in diesel fuel forms corrosive sulfurous and sulfuric acids during combustion. These corrosive acids attack metal surfaces inside the combustion chamber, causing severe ring and cylinder wear. H...