Fuel consumption guarantees for I.C. engines generally rely upon__________________?
Show answer Hide answer
Answer: B. high heat value of oil
Explanation
Fuel consumption guarantees for internal combustion engines are traditionally based on high heat value. Gross calorific value provides a conservative and standardized baseline for commercial engine warranties. Standardized fuel testing laboratories measure total chemical energy release including water vapor condensation. High heating value accounts for the total chemical energy released during complete fuel combustion. Commercial equipment contracts specify gross calorific values to maintain uniform performance guarantees. Fuel suppliers rate commercial petroleum products using standardized bomb calorimeter high heat values.
Engine purchase contracts reference high heat value fuel consumption guarantees for legal compliance. Commercial marine diesel engines are rated and warranted using gross calorific fuel specifications. Standard test codes require high heat value metrics when certifying industrial engine performance. Option A is incorrect because low heat value is used for thermal efficiency, not commercial guarantees. Option C is redundant since net calorific value corresponds directly to the lower heating value. Option D is ambiguous because fuel guarantees require the specific high heat value standard baseline.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. To maximize power output in vehicular petrol engines, the air-fuel ratio is typically set around_________________?
Show answer Hide answer
Answer: B. 12 : 1
A rich air-fuel ratio of approximately twelve to one provides surplus fuel ensuring complete oxygen consumption. This condition releases maximum thermal energy within the combustion chamber, generating peak cylinder pres...
Q2. Does supplying scavenging air at densities above atmospheric imply that an engine is supercharged ?
Show answer Hide answer
Answer: A. yes
Supplying scavenging air at a density above atmospheric is precisely what supercharging means, so the answer is yes. The air is compressed before it enters the cylinder, so each charge contains more oxygen and can burn m...
Q3. Fuel oil flash point refers to__________________?
Show answer Hide answer
Answer: A. minimum temperature to which1 oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in contact with a flame
Flash point is the lowest temperature where fuel oil releases enough vapor to ignite near a flame. It indicates the volatility and fire safety hazard level of liquid hydrocarbon fuels. Option A correctly defines the mini...
Q4. Why is an excessive sulphur content in diesel fuel considered undesirable______________?
Show answer Hide answer
Answer: D. detonation
Excessive sulphur content in diesel fuel forms corrosive sulfurous and sulfuric acids during combustion. These corrosive acids attack metal surfaces inside the combustion chamber, causing severe ring and cylinder wear. H...
Q5. If one diesel engine cylinder receives surplus fuel relative to others, that specific cylinder experiences________________?
Show answer Hide answer
Answer: E. scavenging occurs
Surplus fuel delivery to a single cylinder creates localized combustion anomalies and distinct operational imbalances. Multi-cylinder diesel engines depend on precise fuel metering to ensure smooth torque generation acro...
Q6. Why is diesel engine fuel consumption not guaranteed at one-quarter load________________?
Show answer Hide answer
Answer: C. the small difference in cooling water temperature or in internal friction has a disproportionate effect
At low quarter loads, friction and heat losses consume a large fraction of total engine power. Small variations in internal friction or cooling water temperature drastically skew fuel consumption data. Option C correctly...