Gaseous fuel guarantees are established based on___________________?
Show answer Hide answer
Answer: B. low heat value of oil
Explanation
Gaseous fuel guarantees are conventionally established using the low heat value of the gas to ensure consistent performance standards. The low heat value excludes the latent heat of vaporization of water vapor formed during the combustion process. Using the low heat value provides a reliable baseline for commercial contracts where exhaust moisture cannot be practically condensed. The low heat value of a fuel represents the total heat released when combustion products remain in gaseous state. Calorific value measurements are standardized laboratory procedures used to determine the exact energy content of various fuels. Engineering performance guarantees for gas turbines and boilers require clear thermodynamic definitions of fuel heating values.
Option A is vague and incorrect because fuel guarantees require specific thermodynamic heating values rather than a general term. Option C is wrong because the high heat value includes water condensation energy that is rarely recovered in industrial engines. Options D and E are incorrect because mean heat value is not a standard contractual metric for gaseous fuel performance guarantees.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Does supplying scavenging air at densities above atmospheric imply that an engine is supercharged ?
Show answer Hide answer
Answer: A. yes
Supplying scavenging air at a density above atmospheric is precisely what supercharging means, so the answer is yes. The air is compressed before it enters the cylinder, so each charge contains more oxygen and can burn m...
Q2. Fuel oil flash point refers to__________________?
Show answer Hide answer
Answer: A. minimum temperature to which1 oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in contact with a flame
Flash point is the lowest temperature where fuel oil releases enough vapor to ignite near a flame. It indicates the volatility and fire safety hazard level of liquid hydrocarbon fuels. Option A correctly defines the mini...
Q3. Diesel engines can operate on lean mixtures up to 30:1; petrol engines can achieve similar lean operation provided__________________?
Show answer Hide answer
Answer: C. can not work as it is impossible
Conventional spark-ignition petrol engines cannot operate on extremely lean mixtures like 30 to 1. Combustion stability breaks down entirely when the air-fuel ratio becomes too lean in petrol engines. Severe engine misfi...
Q4. If one diesel engine cylinder receives surplus fuel relative to others, that specific cylinder experiences________________?
Show answer Hide answer
Answer: E. scavenging occurs
Surplus fuel delivery to a single cylinder creates localized combustion anomalies and distinct operational imbalances. Multi-cylinder diesel engines depend on precise fuel metering to ensure smooth torque generation acro...
Q5. Why is diesel engine fuel consumption not guaranteed at one-quarter load________________?
Show answer Hide answer
Answer: C. the small difference in cooling water temperature or in internal friction has a disproportionate effect
At low quarter loads, friction and heat losses consume a large fraction of total engine power. Small variations in internal friction or cooling water temperature drastically skew fuel consumption data. Option C correctly...
Q6. For generating equal power in internal combustion engines, the more economical system is_____________?
Show answer Hide answer
Answer: B. supercharged
Supercharged engines provide a higher air mass per cycle to generate greater power efficiently. Forcing additional air into the cylinders allows more fuel to be burned completely during each power stroke. This increased...