The center of gravity for a thin hollow conical shell lies along its axis at what fractional height___________________?
Show answer Hide answer
Answer: B. one-third of the total height above base
Explanation
The center of gravity for a thin hollow conical shell lies along its axis at one-third of the total height above the base. Integrating the elemental surface areas of a hollow cone yields a centroid located closer to the base than the vertex. This geometric property distinguishes hollow conical shells from solid cones, which have their centers of gravity at one-fourth of the height. The center of gravity is the point where the entire gravitational weight of an object is considered to be concentrated. Calculating centroids for geometric shapes involves integration of differential mass elements over the total volume or surface area. A thin hollow conical shell distributes its mass solely along the slanted surface rather than throughout the interior volume.
One-fourth of the total height represents the center of gravity location for a solid uniform cone, not a hollow shell. One-half of the total height corresponds to the centroid of uniform rods or cylindrical tubes rather than conical shells. Three-eighths of the total height is an incorrect fraction that does not match any standard conical centroid calculation.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. A semicircular disc rests on a horizontal plane with its flat edge horizontal and curved base downward. The static friction coefficient between the disc and plane is \i. Pulling the disc via a horizontal edge force while maintaining a horizontal orientation causes the top force to behave in what manner when movement impends____________________?
Show answer Hide answer
Answer: C. slant down towards direction of pull
When pulling a semicircular disc horizontally from its top edge as motion impends the line of action slants downward. Friction forces at the base combined with the applied pull shift the resultant reaction vector angle....
Q2. Applying a force to a physical body can induce_________________?
Show answer Hide answer
Answer: E. all of the above
Applying an external force to a physical body can induce internal mechanical stresses throughout its material structure. Forces can act to balance other applied loads, thereby maintaining the body in a state of static eq...
Q3. The center of gravity for a solid conical mass is located along its axis at a height of_____________________?
Show answer Hide answer
Answer: A. one-fourth of the total height above base
The center of gravity of a solid right circular cone sits at one fourth of its total height. This vertical position is measured upward directly from the flat circular base of the cone. Integration of mass distribution ac...
Q4. The friction angle represents_______________________?
Show answer Hide answer
Answer: A. angle between normal reaction and the resultant of normal reaction and the limiting friction
The friction angle is the angle between the normal reaction force and the resultant vector of normal and limiting friction. This angle provides a convenient geometric measure of the coefficient of static friction between...
Q5. Coulomb friction describes the resistive force occurring between _________________?
Show answer Hide answer
Answer: A. bodies having relative motion
Coulomb friction describes the resistive force encountered when two solid bodies experience relative sliding motion. This classical friction model assumes frictional resistance is proportional to normal force and indepen...
Q6. For dry sliding surfaces, frictional resistance is________________?
Show answer Hide answer
Answer: C. proportional to velocity of sliding
Kinetic frictional resistance for dry sliding surfaces remains proportional to velocity over standard ranges. Frictional force behavior changes with sliding speed depending on lubrication and surface roughness properties...