Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57062

Coulomb friction describes the resistive force occurring between _________________?

Select your answer for: Coulomb friction describes the resistive force occurring between _________________?
Show answer

Answer: A. bodies having relative motion

Explanation

Coulomb friction describes the resistive force encountered when two solid bodies experience relative sliding motion. This classical friction model assumes frictional resistance is proportional to normal force and independent of contact area. Relative motion between dry or boundary-lubricated solid interfaces generates this predictable tangential resistance. Charles-Augustin de Coulomb formulated laws governing dry friction between contacting solid surfaces. Static and kinetic friction coefficients define the threshold and sliding resistance values in Coulomb friction models. Surface asperities interlocking at microscopic levels contribute to the macroscopic resistive force of friction.

Mechanical engineers use Coulomb friction equations to calculate brake pad holding power and clutch engagement forces. Sliding machinery bearings must account for Coulomb friction losses to prevent overheating and premature wear. Friction analysis is vital for designing self-locking screw threads and mechanical wedge clamping fixtures. Option A accurately specifies that Coulomb friction occurs between solid bodies undergoing relative motion. Restricting friction strictly to dry surfaces ignores boundary-lubricated conditions where Coulomb friction still applies. Fluid friction and viscous drag govern fluid mechanics rather than solid Coulomb friction between moving parts.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. The principle of transmissibility states that the mechanical action of a force on a rigid body_________________?

Select your answer for: The principle of transmissibility states that the mechanical action of a force on a rigid body_________________?
Show answer

Answer: C. the same at every point in its line of action

The principle of transmissibility applies strictly to rigid body mechanical analysis. Sliding a force vector along its exact line of action leaves external effects unchanged. Internal stresses may alter, but external rig...

Q2. The center of gravity for a thin hollow conical shell lies along its axis at what fractional height___________________?

Select your answer for: The center of gravity for a thin hollow conical shell lies along its axis at what fractional height___________________?
Show answer

Answer: B. one-third of the total height above base

The center of gravity for a thin hollow conical shell lies along its axis at one-third of the total height above the base. Integrating the elemental surface areas of a hollow cone yields a centroid located closer to the...

Q3. The resulting mechanical effect of a force on a body is governed by________________?

Select your answer for: The resulting mechanical effect of a force on a body is governed by________________?
Show answer

Answer: D. all of the above

The resulting mechanical effect of a force on a rigid body depends on its magnitude, direction, and line of action. Changing any of these three fundamental characteristics alters the net translational or rotational respo...

Q4. An overhead trolley wire has a mass of 1.2 kg per meter. Its ends are secured to poles spaced 20 meters apart. Given a horizontal tension load of 1500 kg, calculate the center sag (dip) of the span___________________?

Select your answer for: An overhead trolley wire has a mass of 1.2 kg per meter. Its ends are secured to poles spaced 20 meters apart. Given a horizontal tension load of 1500 kg, calculate the center sag (dip) of the span___________________?
Show answer

Answer: C. 4.0 cm

Cable sag formulas calculate center dip using distributed weight and span tension. Multiplying mass per meter by span squared and dividing by eight times tension gives sag. Substituting one point two kg per meter and fif...

Q5. D’Alembert’s principle is applied to convert dynamic problems into equivalent problems of______________________?

Select your answer for: D’Alembert’s principle is applied to convert dynamic problems into equivalent problems of______________________?
Show answer

Answer: A. reducing the problem of kinetics to equivalent statics problem

D'Alembert's principle introduces an inertia force, transforming a dynamic problem of kinetics into an equivalent static equilibrium problem. By applying a fictitious inertia force equal to mass times acceleration, dynam...

Q6. From a circular disc of diameter 6 cm, a smaller circle whose diameter equals the disc's radius is excised. Determine the center of gravity (c.g.) of the remaining portion measured from the original plate center____________________?

Select your answer for: From a circular disc of diameter 6 cm, a smaller circle whose diameter equals the disc's radius is excised. Determine the center of gravity (c.g.) of the remaining portion measured from the original plate center____________________?
Show answer

Answer: A. 0.5 cm

By taking moments of the areas about the original center, removing the smaller circular disc shifts the center of gravity. The calculation balances the remaining area against the excised hole area to find the new centroi...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test