D’Alembert’s principle is applied to convert dynamic problems into equivalent problems of______________________?
Show answer Hide answer
Answer: A. reducing the problem of kinetics to equivalent statics problem
Explanation
D'Alembert's principle introduces an inertia force, transforming a dynamic problem of kinetics into an equivalent static equilibrium problem. By applying a fictitious inertia force equal to mass times acceleration, dynamic equations are rearranged into standard static formats. This clever mathematical transformation allows engineers to solve complex acceleration problems using familiar static equilibrium equations. Kinetics deals with bodies in motion considering the forces that cause that motion, whereas statics deals with stationary systems. Jean le Rond d'Alembert formulated this principle to simplify the mathematical analysis of accelerated mechanical systems. The introduced inertia force always acts in a direction directly opposite to the actual linear or angular acceleration vector.
Determining stresses in a truss is a standard static structural analysis task that does not require D'Alembert's transformation. Analyzing the stability of floating bodies relies on buoyancy and metacentric height principles rather than inertia forces. Designing safe structures generally uses static building codes and load factors rather than converting kinetics to statics.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The friction angle represents_______________________?
Show answer Hide answer
Answer: A. angle between normal reaction and the resultant of normal reaction and the limiting friction
The friction angle is the angle between the normal reaction force and the resultant vector of normal and limiting friction. This angle provides a convenient geometric measure of the coefficient of static friction between...
Q2. Coulomb friction describes the resistive force occurring between _________________?
Show answer Hide answer
Answer: A. bodies having relative motion
Coulomb friction describes the resistive force encountered when two solid bodies experience relative sliding motion. This classical friction model assumes frictional resistance is proportional to normal force and indepen...
Q3. For dry sliding surfaces, frictional resistance is________________?
Show answer Hide answer
Answer: C. proportional to velocity of sliding
Kinetic frictional resistance for dry sliding surfaces remains proportional to velocity over standard ranges. Frictional force behavior changes with sliding speed depending on lubrication and surface roughness properties...
Q4. How does kinetic friction compare in magnitude to static friction___________________?
Show answer Hide answer
Answer: C. less
Kinetic friction is generally less in magnitude than static friction because interlocking surface bonds are easier to maintain. Once sliding motion begins microscopic surface irregularities have less time to settle into...
Q5. When a rigid body remains in static equilibrium under the action of three coplanar forces_____________________?
Show answer Hide answer
Answer: D. B. and C. above
When a rigid body remains in static equilibrium under three coplanar forces, the forces must form a closed triangle. For the moment sum to equal zero about any point, the lines of action of these three forces must be con...
Q6. Forces are designated as coplanar when their lines of action all reside within __________________?
Show answer Hide answer
Answer: B. one plane
Forces whose lines of action lie within the same single geometric plane are designated as coplanar. This two-dimensional classification simplifies vector addition and moment calculations in engineering mechanics. Coplana...