Preventing knock in spark-ignition engines requires unburned end-gas away from the spark plug to possess___________________?
Show answer Hide answer
Answer: E. all of the above
Explanation
Knock occurs when unburned end-gases auto-ignite prematurely ahead of the normal flame front propagation. Low end-gas temperatures and low densities delay spontaneous auto-ignition reactions effectively. Long ignition delay periods provide the flame front sufficient time to consume the fuel safely. Engine knock causes severe pressure spikes, acoustic ringing, and potential piston damage in spark-ignition engines. Auto-ignition behavior depends heavily on fuel chemical composition, temperature, pressure, and residence time. Higher octane fuels resist knock by exhibiting longer ignition delay characteristics under extreme conditions.
High-performance turbocharged engines require intercoolers to lower intake temperatures and prevent engine knock. Optimizing combustion chamber geometry minimizes end-gas residence times and reduces destructive detonation risks. Engine management systems utilize knock sensors to retard spark timing whenever abnormal combustion is detected. Low temperature alone is insufficient unless combined with low density and long ignition delay properties. Rich mixture ratios help cool combustion chambers but do not independently prevent all forms of engine knock. Selecting all of the above is correct because temperature, density, and delay time collectively govern knock.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The theoretically correct air-fuel ratio for petrol engines is roughly___________________?
Show answer Hide answer
Answer: D. 15 : 1
The chemically correct stoichiometric air-fuel ratio for standard petrol is approximately 15 to 1. This means fifteen parts of air by weight are required to completely burn one part of fuel. Stoichiometric mixtures ensur...
Q2. At maximum output, petrol engine exhaust contains CO percentages on the order of____________________?
Show answer Hide answer
Answer: D. Considerable percent
At maximum output power, petrol engines operate on rich air fuel mixtures. Insufficient oxygen during rich combustion prevents complete fuel oxidation, producing carbon monoxide. Exhaust gas analysis during full throttle...
Q3. Diesel engine turbulence chambers operate by__________________?
Show answer Hide answer
Answer: B. fuel is injected into an auxiliary chamber that is separated from the cylinder by an orifice or throat
Diesel turbulence chambers use an auxiliary pre-chamber connected to the main cylinder by a narrow throat. Fuel is injected into this auxiliary chamber where rapid air swirl promotes thorough mixing and initial combustio...
Q4. Incomplete combustion is most readily identified by__________________?
Show answer Hide answer
Answer: C. measuring carbon mono-oxide in flue gases
The presence of carbon monoxide in flue gases is a direct indicator of incomplete combustion. Carbon monoxide forms when available oxygen is insufficient to oxidize fuel carbon completely into dioxide. Measuring this tox...
Q5. Injection lag represents_________________?
Show answer Hide answer
Answer: B. time before actual fuel injection and the pump pluger starts to pump fuel
Injection lag measures the mechanical delay before actual fuel injection begins in the engine. The pump plunger must travel and build sufficient hydraulic pressure to lift the injector valve. This interval occurs between...
Q6. Free vortex motion is characterized by a radial velocity component everywhere equal to________________?
Show answer Hide answer
Answer: C. zero
Free vortex motion is characterized by irrotational fluid flow where fluid particles follow concentric circular paths. In an ideal free vortex, fluid moves tangentially while having no radial velocity component whatsoeve...