Diesel engine precombustion chambers function via________________?
Show answer Hide answer
Answer: C. Only a part of air charge is contained in an auxiliary chamber in which the fuel starts to burn with insufficient air which due to explosion tendency mixes thoroughly into main cylinder charge
Explanation
Precombustion chambers are small auxiliary spaces connected to the main cylinder through a narrow throttling orifice. Fuel is injected directly into this auxiliary chamber where partial combustion rapidly consumes the available oxygen. The resulting pressure spike forces the burning mixture and unburned fuel droplets violently into the main cylinder. Diesel engines rely on compression heat to ignite fuel without electrical spark plugs or ignition systems. Indirect injection engines use prechambers to promote rapid air-fuel mixing and smooth out combustion pressure rises. Auxiliary combustion chambers help older diesel engine designs run more quietly and accept broader fuel qualities.
Piston crown geometry and inlet ports generate swirl in direct injection engines rather than precombustion chambers. Auxiliary chambers are separated by orifices rather than operating as open, undivided main combustion volumes. Diesel engines still require intake and exhaust valves to control fresh air charging and exhaust gas scavenging.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Queuing theory enables mathematical study and analysis of waiting situations provided_________________?
Show answer Hide answer
Answer: D. the laws governing arrivals, service times, and the order in which the arriving units are taken into source are known
Queuing theory requires knowing arrival laws, service times, and queue discipline. Mathematical models depend on statistical distributions of customer arrival patterns. Service rate parameters complete the formulation of...
Q2. The theoretically correct air-fuel ratio for petrol engines is roughly___________________?
Show answer Hide answer
Answer: D. 15 : 1
The chemically correct stoichiometric air-fuel ratio for standard petrol is approximately 15 to 1. This means fifteen parts of air by weight are required to completely burn one part of fuel. Stoichiometric mixtures ensur...
Q3. At maximum output, petrol engine exhaust contains CO percentages on the order of____________________?
Show answer Hide answer
Answer: D. Considerable percent
At maximum output power, petrol engines operate on rich air fuel mixtures. Insufficient oxygen during rich combustion prevents complete fuel oxidation, producing carbon monoxide. Exhaust gas analysis during full throttle...
Q4. Water-wall furnaces transfer heat to the water circuits primarily via _________________?
Show answer Hide answer
Answer: B. radiation
Water-wall furnaces transfer heat primarily via high-intensity radiation. Radiant energy from the burning fuel directly heats the water-filled tubes. Furnace design maximizes radiant heat absorption in modern steam gener...
Q5. Incomplete combustion is most readily identified by__________________?
Show answer Hide answer
Answer: C. measuring carbon mono-oxide in flue gases
The presence of carbon monoxide in flue gases is a direct indicator of incomplete combustion. Carbon monoxide forms when available oxygen is insufficient to oxidize fuel carbon completely into dioxide. Measuring this tox...
Q6. Injection lag represents_________________?
Show answer Hide answer
Answer: B. time before actual fuel injection and the pump pluger starts to pump fuel
Injection lag measures the mechanical delay before actual fuel injection begins in the engine. The pump plunger must travel and build sufficient hydraulic pressure to lift the injector valve. This interval occurs between...