Diesel engine turbulence chambers operate by__________________?
Show answer Hide answer
Answer: B. fuel is injected into an auxiliary chamber that is separated from the cylinder by an orifice or throat
Explanation
Diesel turbulence chambers use an auxiliary pre-chamber connected to the main cylinder by a narrow throat. Fuel is injected into this auxiliary chamber where rapid air swirl promotes thorough mixing and initial combustion. The resulting pressure rise forces burning gases violently into the main cylinder to complete combustion efficiently. Auxiliary chamber designs improve diesel engine performance by creating high velocity air turbulence during compression. Pre-combustion chambers allow engines to operate smoothly across a wider speed range with reduced combustion noise. Thermal losses can increase slightly in divided combustion chambers due to heat transfer through auxiliary walls.
Option A describes open combustion chambers where swirl is generated entirely by piston and port design. Option C is partially descriptive of divided chambers, but option B accurately identifies the auxiliary chamber injection process. Options D and E are incorrect because diesel engines require fuel injection and intake valves to operate.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Compression ignition engine exhaust gases contain carbon monoxide (CO) percentages of________________?
Show answer Hide answer
Answer: A. Zero
Compression ignition engines always operate with a high overall excess of air throughout combustion cycles. Abundant oxygen molecules readily oxidize carbon atoms to form carbon dioxide rather than carbon monoxide. Conse...
Q2. Queuing theory enables mathematical study and analysis of waiting situations provided_________________?
Show answer Hide answer
Answer: D. the laws governing arrivals, service times, and the order in which the arriving units are taken into source are known
Queuing theory requires knowing arrival laws, service times, and queue discipline. Mathematical models depend on statistical distributions of customer arrival patterns. Service rate parameters complete the formulation of...
Q3. The theoretically correct air-fuel ratio for petrol engines is roughly___________________?
Show answer Hide answer
Answer: D. 15 : 1
The chemically correct stoichiometric air-fuel ratio for standard petrol is approximately 15 to 1. This means fifteen parts of air by weight are required to completely burn one part of fuel. Stoichiometric mixtures ensur...
Q4. Preventing knock in spark-ignition engines requires unburned end-gas away from the spark plug to possess___________________?
Show answer Hide answer
Answer: E. all of the above
Knock occurs when unburned end-gases auto-ignite prematurely ahead of the normal flame front propagation. Low end-gas temperatures and low densities delay spontaneous auto-ignition reactions effectively. Long ignition de...
Q5. Water-wall furnaces transfer heat to the water circuits primarily via _________________?
Show answer Hide answer
Answer: B. radiation
Water-wall furnaces transfer heat primarily via high-intensity radiation. Radiant energy from the burning fuel directly heats the water-filled tubes. Furnace design maximizes radiant heat absorption in modern steam gener...
Q6. Incomplete combustion is most readily identified by__________________?
Show answer Hide answer
Answer: C. measuring carbon mono-oxide in flue gases
The presence of carbon monoxide in flue gases is a direct indicator of incomplete combustion. Carbon monoxide forms when available oxygen is insufficient to oxidize fuel carbon completely into dioxide. Measuring this tox...