Incomplete combustion is most readily identified by__________________?
Show answer Hide answer
Answer: C. measuring carbon mono-oxide in flue gases
Explanation
The presence of carbon monoxide in flue gases is a direct indicator of incomplete combustion. Carbon monoxide forms when available oxygen is insufficient to oxidize fuel carbon completely into dioxide. Measuring this toxic gas provides immediate feedback on burner efficiency and air-fuel balance. Complete combustion of hydrocarbon fuels yields only carbon dioxide and harmless water vapor. Incomplete combustion wastes fuel energy and releases dangerous carbon monoxide into the atmosphere. Flue gas analyzers are specialized instruments used to sample and measure combustion exhaust components.
Industrial boilers and furnaces are tuned regularly using flue gas analyzers to maximize efficiency. Detecting carbon monoxide prevents hazardous operating conditions in enclosed industrial facilities. Environmental regulations strictly limit carbon monoxide emissions from industrial combustion sources. Option A mentions a smoky chimney exit, which indicates soot but is less precise than gas testing. Option B suggests excess air, which actually promotes complete combustion rather than incomplete burning. Option D measures exit temperature, which reflects heat transfer rather than chemical combustion completeness.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Diesel engine turbulence chambers operate by__________________?
Show answer Hide answer
Answer: B. fuel is injected into an auxiliary chamber that is separated from the cylinder by an orifice or throat
Diesel turbulence chambers use an auxiliary pre-chamber connected to the main cylinder by a narrow throat. Fuel is injected into this auxiliary chamber where rapid air swirl promotes thorough mixing and initial combustio...
Q2. Diesel engine precombustion chambers function via________________?
Show answer Hide answer
Answer: C. Only a part of air charge is contained in an auxiliary chamber in which the fuel starts to burn with insufficient air which due to explosion tendency mixes thoroughly into main cylinder charge
Precombustion chambers are small auxiliary spaces connected to the main cylinder through a narrow throttling orifice. Fuel is injected directly into this auxiliary chamber where partial combustion rapidly consumes the av...
Q3. Preventing knock in spark-ignition engines requires unburned end-gas away from the spark plug to possess___________________?
Show answer Hide answer
Answer: E. all of the above
Knock occurs when unburned end-gases auto-ignite prematurely ahead of the normal flame front propagation. Low end-gas temperatures and low densities delay spontaneous auto-ignition reactions effectively. Long ignition de...
Q4. Free vortex motion is characterized by a radial velocity component everywhere equal to________________?
Show answer Hide answer
Answer: C. zero
Free vortex motion is characterized by irrotational fluid flow where fluid particles follow concentric circular paths. In an ideal free vortex, fluid moves tangentially while having no radial velocity component whatsoeve...
Q5. Rotating a drum of radius R filled with fluid of density p at angular velocity corad/sec increases outer edge pressure by___________________?
Show answer Hide answer
Answer: B. pco2/?2/2
Rotating a fluid-filled drum creates a forced vortex where the pressure rise at the outer edge is proportional to the square of angular velocity and radius.
Q6. Creep considerations become significant in which application_________________?
Show answer Hide answer
Answer: D. gas turbine blades
Gas turbine blades operate in extreme environments under high centrifugal stresses at very elevated operating temperatures. Constant high temperatures cause metallic crystalline structures to slowly deform under sustaine...