Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57493

Rotating a drum of radius R filled with fluid of density p at angular velocity corad/sec increases outer edge pressure by___________________?

Select your answer for: Rotating a drum of radius R filled with fluid of density p at angular velocity corad/sec increases outer edge pressure by___________________?
Show answer

Answer: B. pco2/?2/2

Explanation

Rotating a fluid-filled drum creates a forced vortex where the pressure rise at the outer edge is proportional to the square of angular velocity and radius.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Water-wall furnaces transfer heat to the water circuits primarily via _________________?

Select your answer for: Water-wall furnaces transfer heat to the water circuits primarily via _________________?
Show answer

Answer: B. radiation

Water-wall furnaces transfer heat primarily via high-intensity radiation. Radiant energy from the burning fuel directly heats the water-filled tubes. Furnace design maximizes radiant heat absorption in modern steam gener...

Q2. Incomplete combustion is most readily identified by__________________?

Select your answer for: Incomplete combustion is most readily identified by__________________?
Show answer

Answer: C. measuring carbon mono-oxide in flue gases

The presence of carbon monoxide in flue gases is a direct indicator of incomplete combustion. Carbon monoxide forms when available oxygen is insufficient to oxidize fuel carbon completely into dioxide. Measuring this tox...

Q3. Injection lag represents_________________?

Select your answer for: Injection lag represents_________________?
Show answer

Answer: B. time before actual fuel injection and the pump pluger starts to pump fuel

Injection lag measures the mechanical delay before actual fuel injection begins in the engine. The pump plunger must travel and build sufficient hydraulic pressure to lift the injector valve. This interval occurs between...

Q4. Fluid flow between two pipeline locations requires a differential pressure exceeding what threshold_______________?

Select your answer for: Fluid flow between two pipeline locations requires a differential pressure exceeding what threshold_______________?
Show answer

Answer: D. all of the above

Fluid flow through any closed pipeline encounters continuous resistance from internal pipe wall friction. Fluid viscosity creates internal shear stresses that resist directional movement along the pipe length. Overcoming...

Q5. Which boiler type enhances furnace draught by utilizing engine exhaust steam__________________?

Select your answer for: Which boiler type enhances furnace draught by utilizing engine exhaust steam__________________?
Show answer

Answer: B. locomotive boiler

Locomotive boilers enhance draught by utilizing engine exhaust steam. Discharging exhaust steam through the smokebox creates a powerful partial vacuum. This mechanical design intensifies airflow through the boiler fire t...

Q6. Iso-octane is characterized by________________?

Select your answer for: Iso-octane is characterized by________________?
Show answer

Answer: C. has octane number of 100

Iso-octane is the reference fuel assigned an octane rating of exactly 100. It possesses exceptional resistance to engine knock and uncontrolled auto-ignition during compression. This chemical compound serves as the upper...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test