The theoretically correct air-fuel ratio for petrol engines is roughly___________________?
Show answer Hide answer
Answer: D. 15 : 1
Explanation
The chemically correct stoichiometric air-fuel ratio for standard petrol is approximately 15 to 1. This means fifteen parts of air by weight are required to completely burn one part of fuel. Stoichiometric mixtures ensure complete combustion with zero unburned fuel or excess oxygen left over. Stoichiometry calculates the exact proportions of chemical reactants required for complete combustion. Hydrocarbon petrol fuels require a precise amount of atmospheric oxygen to react fully. Air is composed of roughly twenty-one percent oxygen and seventy-eight percent nitrogen by volume.
Modern fuel-injected vehicles use oxygen sensors to maintain this ideal 15 to 1 ratio constantly. Deviating from the stoichiometric ratio affects vehicle emissions, fuel economy, and power delivery. Catalytic converters require near-stoichiometric exhaust gases to reduce harmful pollutant emissions effectively. Option A suggests 6 to 1, which is an extremely rich mixture lacking sufficient oxygen to burn. Option B proposes 9 to 1, which remains too rich for clean and efficient petrol engine operation. Option C lists 12 to 1, which is a power-rich mixture but leaner than the stoichiometric ideal.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Supercharging a petrol engine operating on fixed-octane fuel and constant compression ratio will_________________?
Show answer Hide answer
Answer: A. increase the knocking tendency
Supercharging increases the density and pressure of the air-fuel charge entering the engine cylinder. Higher charge density leads to increased peak combustion temperatures and pressures during the power stroke. These ele...
Q2. Regenerative air preheaters accomplish heat transfer by _____________________?
Show answer Hide answer
Answer: B. from heating an intermediateanaterial and then heating the air from this material
Regenerative air preheaters utilize a rotating or stationary matrix material to transfer thermal energy periodically. Hot flue gases first flow through the matrix material, depositing heat into the solid storage structur...
Q3. Compression ignition engine exhaust gases contain carbon monoxide (CO) percentages of________________?
Show answer Hide answer
Answer: A. Zero
Compression ignition engines always operate with a high overall excess of air throughout combustion cycles. Abundant oxygen molecules readily oxidize carbon atoms to form carbon dioxide rather than carbon monoxide. Conse...
Q4. Diesel engine turbulence chambers operate by__________________?
Show answer Hide answer
Answer: B. fuel is injected into an auxiliary chamber that is separated from the cylinder by an orifice or throat
Diesel turbulence chambers use an auxiliary pre-chamber connected to the main cylinder by a narrow throat. Fuel is injected into this auxiliary chamber where rapid air swirl promotes thorough mixing and initial combustio...
Q5. Diesel engine precombustion chambers function via________________?
Show answer Hide answer
Answer: C. Only a part of air charge is contained in an auxiliary chamber in which the fuel starts to burn with insufficient air which due to explosion tendency mixes thoroughly into main cylinder charge
Precombustion chambers are small auxiliary spaces connected to the main cylinder through a narrow throttling orifice. Fuel is injected directly into this auxiliary chamber where partial combustion rapidly consumes the av...
Q6. Preventing knock in spark-ignition engines requires unburned end-gas away from the spark plug to possess___________________?
Show answer Hide answer
Answer: E. all of the above
Knock occurs when unburned end-gases auto-ignite prematurely ahead of the normal flame front propagation. Low end-gas temperatures and low densities delay spontaneous auto-ignition reactions effectively. Long ignition de...