Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57480

Supercharging a petrol engine operating on fixed-octane fuel and constant compression ratio will_________________?

Select your answer for: Supercharging a petrol engine operating on fixed-octane fuel and constant compression ratio will_________________?
Show answer

Answer: A. increase the knocking tendency

Explanation

Supercharging increases the density and pressure of the air-fuel charge entering the engine cylinder. Higher charge density leads to increased peak combustion temperatures and pressures during the power stroke. These elevated temperature and pressure conditions significantly increase the tendency of the fuel-air mixture to knock. Engine knocking occurs when unburned end gas autoignites prematurely ahead of the advancing flame front. Fixed octane fuel has a specific resistance to autoignition that cannot suppress excessive supercharger pressures. Compression ratio and boost pressure together determine the maximum end gas temperature reached in boosted engines.

Option B is incorrect because supercharging raises temperatures and increases the likelihood of engine knock. Option C is wrong because increased air density directly alters cylinder pressures and autoignition behavior. Options D and E are false because thermodynamic laws dictate that higher charge pressures always increase knock tendency.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Grey cast iron holds carbon in the form of____________________?

Select your answer for: Grey cast iron holds carbon in the form of____________________?
Show answer

Answer: C. flakes

Grey cast iron contains carbon exceeding the solubility limit of austenite during solidification cooling. This excess carbon precipitates out of the iron matrix in the structural form of graphite flakes. The exposed grap...

Q2. Locomotive draught is generated using_________________?

Select your answer for: Locomotive draught is generated using_________________?
Show answer

Answer: D. steam jet draught

Steam locomotives generate draught using a steam jet exhaust blast. Exhaust steam discharges into the smokebox to draw combustion gases through tubes. This self-regulating drafting method increases with engine power outp...

Q3. Advancing spark timing in petrol engines results in_______________?

Select your answer for: Advancing spark timing in petrol engines results in_______________?
Show answer

Answer: A. increase the knocking tendency

Advancing the spark timing causes combustion to occur earlier while the piston is still rising. This premature burning creates extreme peak pressures inside the cylinder chamber. Higher peak pressures dramatically increa...

Q4. Compression ignition engine exhaust gases contain carbon monoxide (CO) percentages of________________?

Select your answer for: Compression ignition engine exhaust gases contain carbon monoxide (CO) percentages of________________?
Show answer

Answer: A. Zero

Compression ignition engines always operate with a high overall excess of air throughout combustion cycles. Abundant oxygen molecules readily oxidize carbon atoms to form carbon dioxide rather than carbon monoxide. Conse...

Q5. Queuing theory enables mathematical study and analysis of waiting situations provided_________________?

Select your answer for: Queuing theory enables mathematical study and analysis of waiting situations provided_________________?
Show answer

Answer: D. the laws governing arrivals, service times, and the order in which the arriving units are taken into source are known

Queuing theory requires knowing arrival laws, service times, and queue discipline. Mathematical models depend on statistical distributions of customer arrival patterns. Service rate parameters complete the formulation of...

Q6. The theoretically correct air-fuel ratio for petrol engines is roughly___________________?

Select your answer for: The theoretically correct air-fuel ratio for petrol engines is roughly___________________?
Show answer

Answer: D. 15 : 1

The chemically correct stoichiometric air-fuel ratio for standard petrol is approximately 15 to 1. This means fifteen parts of air by weight are required to completely burn one part of fuel. Stoichiometric mixtures ensur...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test