Locomotive draught is generated using_________________?
Show answer Hide answer
Answer: D. steam jet draught
Explanation
Steam locomotives generate draught using a steam jet exhaust blast. Exhaust steam discharges into the smokebox to draw combustion gases through tubes. This self-regulating drafting method increases with engine power output. Locomotive boilers require powerful draught to maintain intense fire combustion. Smokebox design integrates blast pipes to maximize the effect of escaping steam. Steam locomotives revolutionized nineteenth-century land transportation and commerce.
Understanding historic railway engineering highlights the evolution of thermal power. Draft generation is critical for sustaining boiler pressure in steam locomotives. Mechanical innovations in locomotives significantly improved train hauling capacity. Simple chimneys provide insufficient natural draft for high-output locomotive boilers. Induced draft fans are typically used in stationary power plants rather than steam trains. Combined systems are unnecessary because the steam jet alone provides adequate draft.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Nodular iron contains graphite structured as_____________________?
Show answer Hide answer
Answer: D. spheroids
Nodular cast iron contains graphite arranged in distinct spheroidal or nodular shapes. Special treatment of the molten metal transforms sharp graphite flakes into rounded spheres. Spheroidal graphite stops stress concent...
Q2. Malleable iron contains carbon presented as___________________?
Show answer Hide answer
Answer: E. nodular aggregates of graphite
Malleable cast iron is produced by heat treating white cast iron through a prolonged annealing process. This thermal treatment causes cementite to decompose into stable irregular nodular aggregates of graphite. These gra...
Q3. Raising cooling water temperature in a petrol engine causes_________________?
Show answer Hide answer
Answer: A. increase the knocking tendency
Raising the cooling water temperature increases the thermal energy within combustion chamber walls and internal surfaces. Warmer cylinder walls heat incoming air-fuel mixtures more thoroughly during the intake and compre...
Q4. Locomotive boilers restrict maximum steam pressure to_______________?
Show answer Hide answer
Answer: D. 18 kg/cm2
Traditional locomotive boilers are restricted to moderate operating pressures around eighteen kilograms per square centimeter. Structural limitations of fire tube designs prevent safely containing higher steam pressures....
Q5. Supercharging a petrol engine operating on fixed-octane fuel and constant compression ratio will_________________?
Show answer Hide answer
Answer: A. increase the knocking tendency
Supercharging increases the density and pressure of the air-fuel charge entering the engine cylinder. Higher charge density leads to increased peak combustion temperatures and pressures during the power stroke. These ele...
Q6. Regenerative air preheaters accomplish heat transfer by _____________________?
Show answer Hide answer
Answer: B. from heating an intermediateanaterial and then heating the air from this material
Regenerative air preheaters utilize a rotating or stationary matrix material to transfer thermal energy periodically. Hot flue gases first flow through the matrix material, depositing heat into the solid storage structur...