Nodular iron contains graphite structured as_____________________?
Show answer Hide answer
Answer: D. spheroids
Explanation
Nodular cast iron contains graphite arranged in distinct spheroidal or nodular shapes. Special treatment of the molten metal transforms sharp graphite flakes into rounded spheres. Spheroidal graphite stops stress concentration, resulting in superior mechanical strength and ductility. Cast iron is an iron carbon alloy containing more than two percent carbon content. Graphite morphology greatly determines the tensile strength and toughness of cast iron components. Magnesium or cerium additions to the molten ladle bath promote spheroidal graphite formation.
Automotive crankshafts and suspension components frequently utilize ductile iron for superior durability. Heavy machinery frames benefit from the high impact resistance of nodular iron castings. Replacing traditional gray iron with ductile iron allows engineers to reduce component weight safely. Cementite is a hard, brittle iron carbide phase rather than nodular graphite structures. Free carbon describes general uncombined carbon without specifying the required spheroidal shape. Graphite flakes cause severe stress concentrations, making standard gray iron much more brittle.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Mottled cast iron contains carbon in the form of__________________?
Show answer Hide answer
Answer: E. partly in free and partly in combined state
Mottled cast iron gets its name from the speckled appearance caused by mixed microstructural phases. During solidification, carbon precipitates partly as free graphite flakes and partly remains combined as iron carbide....
Q2. Diesel engines featuring open combustion chambers operate by____________________?
Show answer Hide answer
Answer: A. the shape and layout of the piston crown, the inlet port, and the valve produce the turbulent effect on fuel mixture
Open combustion chamber diesel engines rely on direct fuel injection into a single unified cylinder volume. Engine designers shape the piston crown and intake ports to generate intense air swirl and turbulence. This high...
Q3. Preventing carbon deposits on fuel injectors requires nozzle tip temperatures to be__________________?
Show answer Hide answer
Answer: C. between 250 – 300°C
Maintaining nozzle tip temperatures within 250-300°C prevents carbon deposits. Higher temperatures cause fuel coking, while lower temperatures encourage deposits. Optimal thermal management ensures clean diesel fuel inje...
Q4. Raising cooling water temperature in a petrol engine causes_________________?
Show answer Hide answer
Answer: A. increase the knocking tendency
Raising the cooling water temperature increases the thermal energy within combustion chamber walls and internal surfaces. Warmer cylinder walls heat incoming air-fuel mixtures more thoroughly during the intake and compre...
Q5. Grey cast iron holds carbon in the form of____________________?
Show answer Hide answer
Answer: C. flakes
Grey cast iron contains carbon exceeding the solubility limit of austenite during solidification cooling. This excess carbon precipitates out of the iron matrix in the structural form of graphite flakes. The exposed grap...
Q6. Locomotive draught is generated using_________________?
Show answer Hide answer
Answer: D. steam jet draught
Steam locomotives generate draught using a steam jet exhaust blast. Exhaust steam discharges into the smokebox to draw combustion gases through tubes. This self-regulating drafting method increases with engine power outp...