Raising cooling water temperature in a petrol engine causes_________________?
Show answer Hide answer
Answer: A. increase the knocking tendency
Explanation
Raising the cooling water temperature increases the thermal energy within combustion chamber walls and internal surfaces. Warmer cylinder walls heat incoming air-fuel mixtures more thoroughly during the intake and compression strokes. Higher end-gas temperatures accelerate chemical reaction rates, promoting premature auto-ignition and severe engine knocking. Engine cooling systems regulate operating temperatures using thermostats to maintain optimal thermal efficiency and prevent overheating. Knock occurs when unburned end-gases auto-ignite ahead of the advancing flame front inside the combustion chamber. Combustion chamber wall temperatures directly influence the temperature of the trapped fresh air-fuel charge.
Automotive cooling systems are carefully designed to maintain balanced engine operating temperatures under varying load conditions. Racing engines often require high-capacity radiators to prevent overheating and damaging detonation during extreme competition use. Engine management systems adjust ignition timing and coolant flow to prevent destructive knock during heavy acceleration. Decreasing the knocking tendency contradicts the thermodynamic reality that higher temperatures accelerate pre-ignition chemical reactions. Temperature changes directly alter reaction rates, meaning cooling water conditions always affect engine knocking behavior. Knocking tendencies remain completely predictable based on well-established thermodynamic principles and combustion chemistry laws.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Preventing carbon deposits on fuel injectors requires nozzle tip temperatures to be__________________?
Show answer Hide answer
Answer: C. between 250 – 300°C
Maintaining nozzle tip temperatures within 250-300°C prevents carbon deposits. Higher temperatures cause fuel coking, while lower temperatures encourage deposits. Optimal thermal management ensures clean diesel fuel inje...
Q2. Within a static fluid___________________?
Show answer Hide answer
Answer: D. only normal stresses can exist
In a static fluid at rest, shear stresses cannot exist by definition. Fluid molecules at rest do not slide past one another, eliminating any internal resistance to shear. Therefore, only normal compressive stresses, comm...
Q3. Nodular iron contains graphite structured as_____________________?
Show answer Hide answer
Answer: D. spheroids
Nodular cast iron contains graphite arranged in distinct spheroidal or nodular shapes. Special treatment of the molten metal transforms sharp graphite flakes into rounded spheres. Spheroidal graphite stops stress concent...
Q4. Locomotive draught is generated using_________________?
Show answer Hide answer
Answer: D. steam jet draught
Steam locomotives generate draught using a steam jet exhaust blast. Exhaust steam discharges into the smokebox to draw combustion gases through tubes. This self-regulating drafting method increases with engine power outp...
Q5. Advancing spark timing in petrol engines results in_______________?
Show answer Hide answer
Answer: A. increase the knocking tendency
Advancing the spark timing causes combustion to occur earlier while the piston is still rising. This premature burning creates extreme peak pressures inside the cylinder chamber. Higher peak pressures dramatically increa...
Q6. Locomotive boilers restrict maximum steam pressure to_______________?
Show answer Hide answer
Answer: D. 18 kg/cm2
Traditional locomotive boilers are restricted to moderate operating pressures around eighteen kilograms per square centimeter. Structural limitations of fire tube designs prevent safely containing higher steam pressures....