Indicated mean effective pressure derived from an engine indicator represents________________?
Show answer Hide answer
Answer: E. average pressure
Explanation
Indicated mean effective pressure represents the theoretical average pressure acting on the piston. Multiplying this average pressure by displacement gives the total indicated work per power stroke. Option E correctly defines mean effective pressure as an average pressure measurement. Indicator diagrams plot cylinder pressure against piston volume during complete engine cycles. Mean effective pressure allows engineers to compare engines of different sizes on equal footing. Indicated values include friction losses, whereas brake values measure usable shaft output.
Engine testing laboratories calculate mean effective pressure to evaluate internal combustion performance. Monitoring indicated pressure helps maintenance engineers detect combustion anomalies in large diesels. Specific fuel consumption calculations depend directly on accurate mean effective pressure data. Option A maximum pressure represents peak combustion spike rather than the cycle average. Option B minimum pressure occurs during exhaust or intake strokes, not the entire cycle average. Options C and D describe instantaneous or exhaust pressures instead of the cycle average.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Diesel engine knock is primarily caused by____________________?
Show answer Hide answer
Answer: A. instantaneous and rapid burning of the first part of the charge
Diesel knock is caused by rapid auto-ignition of accumulated fuel built up during the ignition delay. A large mass of fuel injected during the delay period burns almost instantaneously, causing sharp pressure spikes. Thi...
Q2. Compared to a clean filter, a suction-carbureted petrol engine operating with a dirty air filter experiences an air-fuel ratio that is________________?
Show answer Hide answer
Answer: A. higher
A dirty air filter restricts airflow into the engine, creating a higher vacuum in the intake manifold. This increased restriction reduces the mass of air entering the cylinder while fuel delivery remains relatively const...
Q3. Gaseous fuel calorific values are quantified in terms of__________________?
Show answer Hide answer
Answer: D. kcal/m²
Gaseous fuel calorific values are typically quantified per unit volume, such as kilocalories per cubic meter. Measuring gas volume is far more practical in engineering applications than weighing compressible gas masses....
Q4. Compression stroke end-pressures and temperatures in petrol engines are on the order of___________________?
Show answer Hide answer
Answer: B. 6 – 12 kg/cm2 and 250 – 350°C
Compression pressures and temperatures in petrol engines reach 6 to 12 kg/cm squared and 250 to 350°C. Keeping temperatures below auto-ignition limits prevents premature detonation or knock in spark-ignition engines. Mod...
Q5. Compression pressures at the end of the stroke in diesel engines typically reach___________________?
Show answer Hide answer
Answer: E. 35 kg/cm
Diesel engines employ high compression ratios to heat compressed air sufficiently for spontaneous fuel ignition. At the end of the compression stroke, cylinder pressures typically reach approximately 35 kg/cm squared. Th...
Q6. Naturally occurring solid fuels include : ________?
Show answer Hide answer
Answer: D. All of above
Naturally occurring solid fuels include wood, peat, lignite, and various grades of coal. These geological and organic materials form over long periods through the decomposition of plant matter. Each of these solid fuels...