Compression pressures at the end of the stroke in diesel engines typically reach___________________?
Show answer Hide answer
Answer: E. 35 kg/cm
Explanation
Diesel engines employ high compression ratios to heat compressed air sufficiently for spontaneous fuel ignition. At the end of the compression stroke, cylinder pressures typically reach approximately 35 kg/cm squared. This high pressure ensures that injected fuel droplets vaporize instantly and burn efficiently within the combustion chamber. Compression ratio in diesel engines often ranges between 16 to 1 and 22 to 1 for reliable autoignition. High cylinder pressures require robust engine block construction, heavy duty crankshafts, and reinforced cylinder heads. Pressure measurements in engineering practice are frequently expressed in units of kilograms force per square centimeter.
Options A, B, and C cite compression pressures that are far too low for standard compression ignition diesel engines. Option D represents intermediate pressure levels that might occur in low compression or worn diesel units. Values lower than 35 kg/cm² fail to generate the autoignition temperatures required for reliable diesel fuel combustion.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. What volume of air is needed to burn 1 liter of fuel in a four-stroke engine_______________?
Show answer Hide answer
Answer: D. 9-10 m3
Stoichiometric calculations dictate that hydrocarbon liquid fuels require massive volumetric quantities of atmospheric oxygen. Burning one single liter of typical fuel oil demands roughly nine to ten cubic meters of air....
Q2. Indicated mean effective pressure derived from an engine indicator represents________________?
Show answer Hide answer
Answer: E. average pressure
Indicated mean effective pressure represents the theoretical average pressure acting on the piston. Multiplying this average pressure by displacement gives the total indicated work per power stroke. Option E correctly de...
Q3. Diesel engine output can be boosted without enlarging engine dimensions or speed by_________________?
Show answer Hide answer
Answer: E. supercharging
Supercharging increases the mass of air inducted into the cylinder during each intake stroke. This extra oxygen allows more fuel to be injected and burned without enlarging engine dimensions. Engine output is successfull...
Q4. Petrol distillation takes place within this temperature range :
Show answer Hide answer
Answer: C. 65° to 220°
Petrol consists of a complex mixture of volatile hydrocarbons that vaporize within a specific thermal window. Fractional distillation of crude oil separates gasoline components between sixty-five and two hundred twenty d...
Q5. Compared to theoretical air requirements for complete combustion, starting a petrol engine demands air quantities that are___________________?
Show answer Hide answer
Answer: B. loss
Cold starting a petrol engine requires a fuel-rich mixture to compensate for poor fuel vaporization. A rich mixture supplies extra fuel so that enough vapor ignites near the spark plug electrodes. Option B correctly indi...
Q6. A four-stroke internal combustion engine intake valve stays open for nearly___________________?
Show answer Hide answer
Answer: C. 235°
Due to dynamic timing and valve overlap, the intake valve stays open for an extended duration. This extended duration typically measures roughly 235 degrees of total crankshaft rotation angle. Keeping the valve open long...