Naturally occurring solid fuels include : ________?
Show answer Hide answer
Answer: D. All of above
Explanation
Naturally occurring solid fuels include wood, peat, lignite, and various grades of coal. These geological and organic materials form over long periods through the decomposition of plant matter. Each of these solid fuels serves as a primary source of thermal energy in industrial combustion. Coalification is the geological process transforming buried plant debris into carbon-rich solid fuels. Peat represents the earliest stage of organic accumulation preceding brown coal and lignite formation. Solid fuel classification depends on fixed carbon percentage, volatile matter, and moisture content.
Thermal power stations burn vast quantities of naturally occurring solid fuels to generate electricity. Historical industrial revolutions were powered almost entirely by the combustion of solid coal fuels. Peat harvesting provides domestic heating fuel in regions with extensive wetland deposits. Wood is a natural solid fuel but represents only one category among multiple geological formations. Peat and lignite are important intermediate solid fuels leading up to high-rank anthracite coal. Selecting all of the above correctly acknowledges the complete spectrum of naturally occurring solid fuels.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Indicated mean effective pressure derived from an engine indicator represents________________?
Show answer Hide answer
Answer: E. average pressure
Indicated mean effective pressure represents the theoretical average pressure acting on the piston. Multiplying this average pressure by displacement gives the total indicated work per power stroke. Option E correctly de...
Q2. Diesel engine output can be boosted without enlarging engine dimensions or speed by_________________?
Show answer Hide answer
Answer: E. supercharging
Supercharging increases the mass of air inducted into the cylinder during each intake stroke. This extra oxygen allows more fuel to be injected and burned without enlarging engine dimensions. Engine output is successfull...
Q3. Compression stroke end-pressures and temperatures in petrol engines are on the order of___________________?
Show answer Hide answer
Answer: B. 6 – 12 kg/cm2 and 250 – 350°C
Compression pressures and temperatures in petrol engines reach 6 to 12 kg/cm squared and 250 to 350°C. Keeping temperatures below auto-ignition limits prevents premature detonation or knock in spark-ignition engines. Mod...
Q4. Compared to theoretical air requirements for complete combustion, starting a petrol engine demands air quantities that are___________________?
Show answer Hide answer
Answer: B. loss
Cold starting a petrol engine requires a fuel-rich mixture to compensate for poor fuel vaporization. A rich mixture supplies extra fuel so that enough vapor ignites near the spark plug electrodes. Option B correctly indi...
Q5. A four-stroke internal combustion engine intake valve stays open for nearly___________________?
Show answer Hide answer
Answer: C. 235°
Due to dynamic timing and valve overlap, the intake valve stays open for an extended duration. This extended duration typically measures roughly 235 degrees of total crankshaft rotation angle. Keeping the valve open long...
Q6. Increasing air inlet temperatures causes diesel engine performance ratings to___________________?
Show answer Hide answer
Answer: B. decrease linearly
Increasing air inlet temperature decreases air density, leading to a linear drop in diesel engine performance. Lower air density reduces the mass of oxygen entering the cylinder during each intake stroke. Reduced oxygen...