Petrol distillation takes place within this temperature range :
Show answer Hide answer
Answer: C. 65° to 220°
Explanation
Petrol consists of a complex mixture of volatile hydrocarbons that vaporize within a specific thermal window. Fractional distillation of crude oil separates gasoline components between sixty-five and two hundred twenty degrees Celsius. This precise boiling range ensures proper fuel vaporization inside intake manifolds before entering combustion chambers. Crude oil is refined using fractional distillation towers exploiting differing boiling points of hydrocarbon chains. Gasoline fractions contain hydrocarbons typically ranging from four to twelve carbon atoms per molecule. Volatility curves dictate how easily petrol evaporates at varying ambient temperatures across different seasons.
Extremely low ranges represent highly volatile gases rather than liquid petrol fractions suitable for storage. Higher distillation ranges between two hundred and three hundred fifty degrees characterize heavier diesel or kerosene fuels. Narrow ranges like fifteen to one hundred twenty degrees omit heavier hydrocarbon chains essential for energy density.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Diesel engine output can be boosted without enlarging engine dimensions or speed by_________________?
Show answer Hide answer
Answer: E. supercharging
Supercharging increases the mass of air inducted into the cylinder during each intake stroke. This extra oxygen allows more fuel to be injected and burned without enlarging engine dimensions. Engine output is successfull...
Q2. Compression stroke end-pressures and temperatures in petrol engines are on the order of___________________?
Show answer Hide answer
Answer: B. 6 – 12 kg/cm2 and 250 – 350°C
Compression pressures and temperatures in petrol engines reach 6 to 12 kg/cm squared and 250 to 350°C. Keeping temperatures below auto-ignition limits prevents premature detonation or knock in spark-ignition engines. Mod...
Q3. Compression pressures at the end of the stroke in diesel engines typically reach___________________?
Show answer Hide answer
Answer: E. 35 kg/cm
Diesel engines employ high compression ratios to heat compressed air sufficiently for spontaneous fuel ignition. At the end of the compression stroke, cylinder pressures typically reach approximately 35 kg/cm squared. Th...
Q4. A four-stroke internal combustion engine intake valve stays open for nearly___________________?
Show answer Hide answer
Answer: C. 235°
Due to dynamic timing and valve overlap, the intake valve stays open for an extended duration. This extended duration typically measures roughly 235 degrees of total crankshaft rotation angle. Keeping the valve open long...
Q5. Increasing air inlet temperatures causes diesel engine performance ratings to___________________?
Show answer Hide answer
Answer: B. decrease linearly
Increasing air inlet temperature decreases air density, leading to a linear drop in diesel engine performance. Lower air density reduces the mass of oxygen entering the cylinder during each intake stroke. Reduced oxygen...
Q6. Forcing pressurized extra air into engine cylinders is known as________________?
Show answer Hide answer
Answer: C. supercharging
Forcing pressurized extra air into engine cylinders is universally defined in mechanical engineering as supercharging. A supercharger compressor raises the density of the intake air charge above normal atmospheric pressu...