Forcing pressurized extra air into engine cylinders is known as________________?
Show answer Hide answer
Answer: C. supercharging
Explanation
Forcing pressurized extra air into engine cylinders is universally defined in mechanical engineering as supercharging. A supercharger compressor raises the density of the intake air charge above normal atmospheric pressure levels. This mechanical pressurization forces more oxygen into the combustion chamber to increase total engine power output. Superchargers are typically driven mechanically by a belt or chain connected directly to the engine crankshaft. Forced induction systems compensate for low air density found at high altitudes or during rapid throttle demands. The volumetric efficiency of a supercharged engine can exceed one hundred percent due to the pressurized intake charge.
Option A is incorrect because scavenging refers to clearing exhaust gases from the cylinder rather than pressurizing intake air. Option B is wrong because turbulence describes internal fluid mixing motion rather than forcing pressurized air into cylinders. Options D and E describe abnormal combustion phenomena and fuel preparation processes rather than air pressurization.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Petrol distillation takes place within this temperature range :
Show answer Hide answer
Answer: C. 65° to 220°
Petrol consists of a complex mixture of volatile hydrocarbons that vaporize within a specific thermal window. Fractional distillation of crude oil separates gasoline components between sixty-five and two hundred twenty d...
Q2. Compared to theoretical air requirements for complete combustion, starting a petrol engine demands air quantities that are___________________?
Show answer Hide answer
Answer: B. loss
Cold starting a petrol engine requires a fuel-rich mixture to compensate for poor fuel vaporization. A rich mixture supplies extra fuel so that enough vapor ignites near the spark plug electrodes. Option B correctly indi...
Q3. A four-stroke internal combustion engine intake valve stays open for nearly___________________?
Show answer Hide answer
Answer: C. 235°
Due to dynamic timing and valve overlap, the intake valve stays open for an extended duration. This extended duration typically measures roughly 235 degrees of total crankshaft rotation angle. Keeping the valve open long...
Q4. Peak temperatures within internal combustion engine cylinders reach approximately________________?
Show answer Hide answer
Answer: D. 2000-2500°C
Peak temperatures within internal combustion engine cylinders reach approximately 2000 to 2500 degrees Celsius. Combustion of compressed air-fuel mixtures releases immense chemical energy raising local gas temperatures....
Q5. Specific fuel consumption of a petrol engine compared to an equal-horsepower diesel engine is_______________?
Show answer Hide answer
Answer: B. more
Petrol engines operate at lower compression ratios restricted by fuel auto-ignition limits known as engine knock. Throttle valve restrictions during part-load operation introduce pumping losses that degrade overall therm...
Q6. Approximate brake horsepower specific fuel consumption for petrol engines is__________________?
Show answer Hide answer
Answer: C. 0.25 kg
Brake-specific fuel consumption measures fuel mass consumed per unit of brake horsepower output. Standard petrol engines typically achieve a specific fuel consumption around zero point twenty-five kg. Option C correctly...