Approximate brake horsepower specific fuel consumption for petrol engines is__________________?
Show answer Hide answer
Answer: C. 0.25 kg
Explanation
Brake-specific fuel consumption measures fuel mass consumed per unit of brake horsepower output. Standard petrol engines typically achieve a specific fuel consumption around zero point twenty-five kg. Option C correctly identifies zero point twenty-five kg per horsepower-hour as the approximate value. Specific fuel consumption is a key metric for evaluating internal combustion engine efficiency. Lower specific fuel consumption values indicate better fuel economy and thermal efficiency. Engine operating conditions like load and speed significantly affect specific fuel consumption rates.
Automotive engineers use specific fuel consumption maps to determine optimal engine operating zones. Comparing petrol and diesel engines often highlights diesel lower specific fuel consumption rates. Fuel efficiency standards require manufacturers to minimize specific fuel consumption across all loads. Option A zero point fifteen kg is unrealistically low for standard petrol engine efficiency. Option B zero point two kg represents high performance targets rather than typical average engines. Options D and E overestimate fuel consumption for standard well-tuned petrol engines.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Forcing pressurized extra air into engine cylinders is known as________________?
Show answer Hide answer
Answer: C. supercharging
Forcing pressurized extra air into engine cylinders is universally defined in mechanical engineering as supercharging. A supercharger compressor raises the density of the intake air charge above normal atmospheric pressu...
Q2. Engine intake valves are sized relative to exhaust valves by being_________________?
Show answer Hide answer
Answer: B. less
Engine intake valves are typically sized larger than exhaust valves to facilitate better cylinder filling, though option B is marked. Let's verify standard: intake is larger, so marked answer 'less' is incorrect.
Q3. Peak temperatures within internal combustion engine cylinders reach approximately________________?
Show answer Hide answer
Answer: D. 2000-2500°C
Peak temperatures within internal combustion engine cylinders reach approximately 2000 to 2500 degrees Celsius. Combustion of compressed air-fuel mixtures releases immense chemical energy raising local gas temperatures....
Q4. The ratio comparing indicated thermal efficiency to air-standard cycle efficiency is termed__________________?
Show answer Hide answer
Answer: C. relative efficiency
Relative efficiency is defined as the ratio of indicated thermal efficiency to ideal air-standard efficiency. This metric compares real engine performance against theoretical thermodynamic cycle limitations. Frictional l...
Q5. Diesel engine fuel injection typically occurs under pressures of_________________?
Show answer Hide answer
Answer: D. 90-130 kg/cm2
Diesel fuel injection systems operate at extremely high pressures to achieve fine atomization of the liquid fuel. Typical injection pressures range from 150 to 250 kg/cm squared to force fuel through tiny nozzle orifices...
Q6. During crude oil heating, which hydrocarbon vaporizes initially______________?
Show answer Hide answer
Answer: E. natural gas
Natural gas consists of the lightest hydrocarbons and has the lowest boiling point, causing it to vaporize first during crude oil heating.