Diesel engine fuel injection typically occurs under pressures of_________________?
Show answer Hide answer
Answer: D. 90-130 kg/cm2
Explanation
Diesel fuel injection systems operate at extremely high pressures to achieve fine atomization of the liquid fuel. Typical injection pressures range from 150 to 250 kg/cm squared to force fuel through tiny nozzle orifices. High pressure atomization ensures that fuel droplets mix rapidly with hot compressed air for complete combustion. Modern common rail diesel systems can achieve even higher injection pressures to minimize exhaust emissions and noise. Injection pumps and precision nozzles must withstand immense hydraulic forces during continuous heavy duty engine operation. Fuel droplet size decreases as injection pressure increases, improving the surface area available for chemical reactions.
Options A, B, and C describe pressures that are far too low to properly atomize fuel in modern diesel engines. Option D represents moderate pressures that might be insufficient for modern direct injection diesel combustion requirements. Inadequate injection pressure leads to poor fuel spray penetration, incomplete combustion, and heavy exhaust smoke.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Specific fuel consumption of a petrol engine compared to an equal-horsepower diesel engine is_______________?
Show answer Hide answer
Answer: B. more
Petrol engines operate at lower compression ratios restricted by fuel auto-ignition limits known as engine knock. Throttle valve restrictions during part-load operation introduce pumping losses that degrade overall therm...
Q2. Approximate brake horsepower specific fuel consumption for petrol engines is__________________?
Show answer Hide answer
Answer: C. 0.25 kg
Brake-specific fuel consumption measures fuel mass consumed per unit of brake horsepower output. Standard petrol engines typically achieve a specific fuel consumption around zero point twenty-five kg. Option C correctly...
Q3. Increasing the cut-off ratio of a fixed-compression-ratio diesel cycle affects thermal efficiency by___________________?
Show answer Hide answer
Answer: B. decrease
Increasing the cut-off ratio at a fixed compression ratio in a diesel cycle reduces performance. A larger cut-off ratio means heat addition continues later into the power expansion stroke. This leaves less room for the e...
Q4. Petrol engine air-fuel mixtures are governed by__________________?
Show answer Hide answer
Answer: D. carburettion
In petrol engines, air-fuel mixtures are governed through the process of carburetion and fuel metering. Carburetion atomizes liquid fuel and mixes it thoroughly with incoming induction air before cylinder entry. Proper c...
Q5. Which lubricating oil exhibits higher viscosity_________________?
Show answer Hide answer
Answer: E. SAE 80
The Society of Automotive Engineers numerical grading system assigns higher ratings to thicker lubricating oils. An SAE eighty grade oil possesses high resistance to flow compared to lower viscosity engine oil classifica...
Q6. The primary motivation for engine supercharging is to________________?
Show answer Hide answer
Answer: C. reduce weight and bulk for a given out-put
Supercharging forces denser air into engine cylinders, enabling higher fuel injection and power. This allows a smaller, lighter engine to produce the same power output as a larger naturally aspirated unit. Option C corre...