Specific fuel consumption of a petrol engine compared to an equal-horsepower diesel engine is_______________?
Show answer Hide answer
Answer: B. more
Explanation
Petrol engines operate at lower compression ratios restricted by fuel auto-ignition limits known as engine knock. Throttle valve restrictions during part-load operation introduce pumping losses that degrade overall thermal efficiency. These thermodynamic limitations result in higher specific fuel consumption compared to compression ignition engines. Specific fuel consumption measures the mass of fuel required to produce one unit of brake power over time. Diesel engines operate unthrottled with high compression ratios, yielding superior thermodynamic Carnot efficiencies. Thermal efficiency directly dictates how effectively an internal combustion engine converts chemical energy into mechanical work.
Commercial transport vehicles exclusively use diesel engines to minimize operating fuel consumption and maximize freight profitability. Passenger cars increasingly adopt advanced direct-injection petrol technologies to bridge the efficiency gap with diesels. Stationary power generators choose compression-ignition engines to lower long-term operational fuel expenditures. Claiming equal fuel consumption ignores fundamental thermodynamic efficiency differences between spark and compression ignition. Stating petrol engines use less fuel contradicts established thermal efficiency data and engine performance metrics. Condition-dependent variability does not negate the intrinsic thermodynamic advantage of diesel compression ratios.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Increasing air inlet temperatures causes diesel engine performance ratings to___________________?
Show answer Hide answer
Answer: B. decrease linearly
Increasing air inlet temperature decreases air density, leading to a linear drop in diesel engine performance. Lower air density reduces the mass of oxygen entering the cylinder during each intake stroke. Reduced oxygen...
Q2. Forcing pressurized extra air into engine cylinders is known as________________?
Show answer Hide answer
Answer: C. supercharging
Forcing pressurized extra air into engine cylinders is universally defined in mechanical engineering as supercharging. A supercharger compressor raises the density of the intake air charge above normal atmospheric pressu...
Q3. Engine intake valves are sized relative to exhaust valves by being_________________?
Show answer Hide answer
Answer: B. less
Engine intake valves are typically sized larger than exhaust valves to facilitate better cylinder filling, though option B is marked. Let's verify standard: intake is larger, so marked answer 'less' is incorrect.
Q4. Increasing the cut-off ratio of a fixed-compression-ratio diesel cycle affects thermal efficiency by___________________?
Show answer Hide answer
Answer: B. decrease
Increasing the cut-off ratio at a fixed compression ratio in a diesel cycle reduces performance. A larger cut-off ratio means heat addition continues later into the power expansion stroke. This leaves less room for the e...
Q5. The ratio comparing indicated thermal efficiency to air-standard cycle efficiency is termed__________________?
Show answer Hide answer
Answer: C. relative efficiency
Relative efficiency is defined as the ratio of indicated thermal efficiency to ideal air-standard efficiency. This metric compares real engine performance against theoretical thermodynamic cycle limitations. Frictional l...
Q6. Diesel engine fuel injection typically occurs under pressures of_________________?
Show answer Hide answer
Answer: D. 90-130 kg/cm2
Diesel fuel injection systems operate at extremely high pressures to achieve fine atomization of the liquid fuel. Typical injection pressures range from 150 to 250 kg/cm squared to force fuel through tiny nozzle orifices...