Increasing the cut-off ratio of a fixed-compression-ratio diesel cycle affects thermal efficiency by___________________?
Show answer Hide answer
Answer: B. decrease
Explanation
Increasing the cut-off ratio at a fixed compression ratio in a diesel cycle reduces performance. A larger cut-off ratio means heat addition continues later into the power expansion stroke. This leaves less room for the expansion ratio of work extraction, lowering thermal efficiency. The cut-off ratio is the ratio of cylinder volumes after and before combustion heat addition. Thermal efficiency of a diesel cycle depends on both compression ratio and cut-off ratio values. Work extraction occurs during the expansion stroke following the completion of fuel combustion.
Thermodynamic analysis helps engineers optimize fuel injection timing and duration in diesel engines. Excessive fuel injection late in the power stroke wastes energy and reduces overall cycle efficiency. Balancing compression and expansion ratios is a primary goal in internal combustion engine design. Option A claims thermal efficiency increases, which contradicts standard thermodynamic cycle equations. Option C states efficiency is independent, ignoring the clear mathematical dependence on cut-off ratio. Option D suggests variable outcomes, whereas thermodynamic laws dictate a consistent decrease in efficiency.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Engine intake valves are sized relative to exhaust valves by being_________________?
Show answer Hide answer
Answer: B. less
Engine intake valves are typically sized larger than exhaust valves to facilitate better cylinder filling, though option B is marked. Let's verify standard: intake is larger, so marked answer 'less' is incorrect.
Q2. Peak temperatures within internal combustion engine cylinders reach approximately________________?
Show answer Hide answer
Answer: D. 2000-2500°C
Peak temperatures within internal combustion engine cylinders reach approximately 2000 to 2500 degrees Celsius. Combustion of compressed air-fuel mixtures releases immense chemical energy raising local gas temperatures....
Q3. Specific fuel consumption of a petrol engine compared to an equal-horsepower diesel engine is_______________?
Show answer Hide answer
Answer: B. more
Petrol engines operate at lower compression ratios restricted by fuel auto-ignition limits known as engine knock. Throttle valve restrictions during part-load operation introduce pumping losses that degrade overall therm...
Q4. Diesel engine fuel injection typically occurs under pressures of_________________?
Show answer Hide answer
Answer: D. 90-130 kg/cm2
Diesel fuel injection systems operate at extremely high pressures to achieve fine atomization of the liquid fuel. Typical injection pressures range from 150 to 250 kg/cm squared to force fuel through tiny nozzle orifices...
Q5. During crude oil heating, which hydrocarbon vaporizes initially______________?
Show answer Hide answer
Answer: E. natural gas
Natural gas consists of the lightest hydrocarbons and has the lowest boiling point, causing it to vaporize first during crude oil heating.
Q6. Petrol engine air-fuel mixtures are governed by__________________?
Show answer Hide answer
Answer: D. carburettion
In petrol engines, air-fuel mixtures are governed through the process of carburetion and fuel metering. Carburetion atomizes liquid fuel and mixes it thoroughly with incoming induction air before cylinder entry. Proper c...