Which lubricating oil exhibits higher viscosity_________________?
Show answer Hide answer
Answer: E. SAE 80
Explanation
The Society of Automotive Engineers numerical grading system assigns higher ratings to thicker lubricating oils. An SAE eighty grade oil possesses high resistance to flow compared to lower viscosity engine oil classifications. This high viscosity maintains a thick protective fluid film under heavy gear tooth loading conditions. Viscosity measures a fluid internal resistance to shear flow at standardized testing temperatures. Multi-grade and single-grade gear oils use higher SAE numbers than standard engine crankcase lubricants. Selecting correct oil viscosity ensures proper hydrodynamic lubrication and prevents direct metal-to-metal contact.
Automotive manual transmissions and differential gearboxes require high-viscosity SAE eighty or ninety oils for protection. Using low-viscosity engine oil in heavy gear applications would result in rapid film breakdown and gear failure. Industrial machinery gear trains rely on heavy lubricating oils to withstand high shock loads and operating temperatures. SAE thirty oils are formulated for engine crankcases and exhibit much lower viscosity than gear lubricants. SAE fifty oils represent traditional high-temperature engine lubricants rather than heavy transmission oils. Lower SAE values indicate thinner fluids unsuitable for heavy-duty boundary lubrication requirements.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The ratio comparing indicated thermal efficiency to air-standard cycle efficiency is termed__________________?
Show answer Hide answer
Answer: C. relative efficiency
Relative efficiency is defined as the ratio of indicated thermal efficiency to ideal air-standard efficiency. This metric compares real engine performance against theoretical thermodynamic cycle limitations. Frictional l...
Q2. Diesel engine fuel injection typically occurs under pressures of_________________?
Show answer Hide answer
Answer: D. 90-130 kg/cm2
Diesel fuel injection systems operate at extremely high pressures to achieve fine atomization of the liquid fuel. Typical injection pressures range from 150 to 250 kg/cm squared to force fuel through tiny nozzle orifices...
Q3. During crude oil heating, which hydrocarbon vaporizes initially______________?
Show answer Hide answer
Answer: E. natural gas
Natural gas consists of the lightest hydrocarbons and has the lowest boiling point, causing it to vaporize first during crude oil heating.
Q4. Supercharging is mandatory in_____________?
Show answer Hide answer
Answer: D. aircraft engines
Aircraft engines require supercharging to maintain air intake density at high operational altitudes. Atmospheric pressure drops significantly as altitude increases, starving naturally aspirated engines of oxygen. Superch...
Q5. Which liquid fuel is recognized as the lightest and most volatile________________?
Show answer Hide answer
Answer: D. gasoline
Gasoline is a highly refined petroleum fraction that is lighter and more volatile than diesel or kerosene. Its lower boiling point range allows it to vaporize easily at ambient temperatures for spark ignition. Light hydr...
Q6. Which device does not qualify as an internal combustion engine___________________?
Show answer Hide answer
Answer: E. steam turbine
A steam turbine is classified as an external combustion engine because the working fluid is heated outside the turbine. Combustion takes place in a separate boiler furnace where heat is transferred to water to generate h...