Supercharging is mandatory in_____________?
Show answer Hide answer
Answer: D. aircraft engines
Explanation
Aircraft engines require supercharging to maintain air intake density at high operational altitudes. Atmospheric pressure drops significantly as altitude increases, starving naturally aspirated engines of oxygen. Superchargers compress thin high-altitude air to ensure consistent power output during flight. Barometric pressure decreases exponentially with altitude, causing a severe reduction in ambient air density. Aircraft piston engines experience major power losses aloft unless equipped with forced induction. Turbochargers and superchargers act as altitude compensating systems for aviation powerplants.
Commercial and military aircraft fly at high altitudes where aerodynamic drag is lower and efficiency is higher. Without supercharging, an airplane would lose most of its engine power before reaching cruising altitude. Aviation safety depends on reliable engine performance across drastic changes in atmospheric pressure. Option A mentions standard diesel engines, which operate at ground level without mandatory supercharging. Option B refers to gas turbines, which inherently compress air through continuous flow compressors anyway. Option C suggests petrol engines, which are not universally supercharged unless used in aircraft.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. During crude oil heating, which hydrocarbon vaporizes initially______________?
Show answer Hide answer
Answer: E. natural gas
Natural gas consists of the lightest hydrocarbons and has the lowest boiling point, causing it to vaporize first during crude oil heating.
Q2. Petrol engine air-fuel mixtures are governed by__________________?
Show answer Hide answer
Answer: D. carburettion
In petrol engines, air-fuel mixtures are governed through the process of carburetion and fuel metering. Carburetion atomizes liquid fuel and mixes it thoroughly with incoming induction air before cylinder entry. Proper c...
Q3. Which lubricating oil exhibits higher viscosity_________________?
Show answer Hide answer
Answer: E. SAE 80
The Society of Automotive Engineers numerical grading system assigns higher ratings to thicker lubricating oils. An SAE eighty grade oil possesses high resistance to flow compared to lower viscosity engine oil classifica...
Q4. Which device does not qualify as an internal combustion engine___________________?
Show answer Hide answer
Answer: E. steam turbine
A steam turbine is classified as an external combustion engine because the working fluid is heated outside the turbine. Combustion takes place in a separate boiler furnace where heat is transferred to water to generate h...
Q5. Which solid fuel yields the highest calorific value : ___________?
Show answer Hide answer
Answer: D. Anthracite coal
Anthracite coal yields the highest calorific value among all naturally occurring solid fuel types. It represents the highest rank of coal with maximum fixed carbon content and minimum volatile matter. This dense chemical...
Q6. Diesel fuel oil volatility is characterized as_________________?
Show answer Hide answer
Answer: D. indicated by 90% distillation temperature, i.e., when 90% of sample oil has distilled off
Diesel fuel volatility is standardly quantified using laboratory distillation curves rather than simple flash points. The temperature at which ninety percent of the fuel sample distills off indicates its vaporization per...