Which solid fuel yields the highest calorific value : ___________?
Show answer Hide answer
Answer: D. Anthracite coal
Explanation
Anthracite coal yields the highest calorific value among all naturally occurring solid fuel types. It represents the highest rank of coal with maximum fixed carbon content and minimum volatile matter. This dense chemical composition releases maximum thermal energy per unit mass during complete combustion. Coal rank progresses from peat through lignite and bituminous coal to hard, shiny anthracite coal. Higher fixed carbon percentages directly correlate with increased energy density and higher calorific values. Anthracite burns cleanly with a short, hot flame and produces minimal smoke during industrial usage.
Home heating stoves utilize anthracite coal for clean-burning, long-lasting domestic thermal output. Metallurgical processes benefit from anthracite high energy density and low impurity levels. Power plant operators select coal ranks based on boiler design specifications and regional fuel availability. Wood has a significantly lower calorific value due to high oxygen and moisture-holding organic structures. Peat represents an early-stage fuel with high moisture and low carbon content yielding low heat output. Bituminous coal has a lower fixed carbon percentage and calorific value compared to premium anthracite.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The primary motivation for engine supercharging is to________________?
Show answer Hide answer
Answer: C. reduce weight and bulk for a given out-put
Supercharging forces denser air into engine cylinders, enabling higher fuel injection and power. This allows a smaller, lighter engine to produce the same power output as a larger naturally aspirated unit. Option C corre...
Q2. Supercharging is mandatory in_____________?
Show answer Hide answer
Answer: D. aircraft engines
Aircraft engines require supercharging to maintain air intake density at high operational altitudes. Atmospheric pressure drops significantly as altitude increases, starving naturally aspirated engines of oxygen. Superch...
Q3. Which liquid fuel is recognized as the lightest and most volatile________________?
Show answer Hide answer
Answer: D. gasoline
Gasoline is a highly refined petroleum fraction that is lighter and more volatile than diesel or kerosene. Its lower boiling point range allows it to vaporize easily at ambient temperatures for spark ignition. Light hydr...
Q4. Which substance is predominantly utilized as blast furnace fuel for reducing iron ore to pig iron?
Show answer Hide answer
Answer: C. Hard coke
Hard coke provides high carbon content and structural permeability required in blast furnace operations. It acts as a chemical reducing agent producing carbon monoxide to strip oxygen from iron ore. Option C correctly id...
Q5. During normal operation, cylinder wall interior surface temperatures are restricted from exceeding____________________?
Show answer Hide answer
Answer: C. 180°C
Cylinder wall temperatures are kept below approximately 180 degrees Celsius during normal operation. Exceeding this specific temperature threshold causes lubricating oil film breakdown and thermal stress. Effective cooli...
Q6. Diesel engine fuel ignition is initiated by___________________?
Show answer Hide answer
Answer: C. heat resulting from compressing air that is supplied for combustion
Diesel engines rely on the heat generated by rapidly compressing intake air to ignite fuel. The extreme compression ratio forces air temperature far above the autoignition point of diesel oil. No external electrical spar...