Diesel fuel oil volatility is characterized as_________________?
Show answer Hide answer
Answer: D. indicated by 90% distillation temperature, i.e., when 90% of sample oil has distilled off
Explanation
Diesel fuel volatility is standardly quantified using laboratory distillation curves rather than simple flash points. The temperature at which ninety percent of the fuel sample distills off indicates its vaporization performance. This ninety percent distillation point ensures complete fuel evaporation before combustion chamber wall impingement occurs. Fuel volatility affects starting, warm-up behavior, smoke emissions, and power output in compression ignition engines. Standardized ASTM distillation tests measure boiling point progression from initial boiling point to complete recovery. Heavy diesel fractions require careful distillation control to prevent unburnt hydrocarbon deposits and exhaust soot.
Refinery quality control laboratories test diesel batches continuously to meet strict regional volatility standards. Marine diesel engines running on heavy residual fuels require preheating to achieve proper injection volatility. Proper volatility prevents fuel pooling in combustion chambers, which causes engine roughness and white smoke. Definitions describing minimum temperature for momentary ignition refer strictly to flash point testing parameters. Temperatures where fuel solidifies or congeals describe the pour point rather than fuel volatility characteristics. Catching fire without external aid defines the auto-ignition temperature rather than fractional distillation properties.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Supercharging is mandatory in_____________?
Show answer Hide answer
Answer: D. aircraft engines
Aircraft engines require supercharging to maintain air intake density at high operational altitudes. Atmospheric pressure drops significantly as altitude increases, starving naturally aspirated engines of oxygen. Superch...
Q2. Which liquid fuel is recognized as the lightest and most volatile________________?
Show answer Hide answer
Answer: D. gasoline
Gasoline is a highly refined petroleum fraction that is lighter and more volatile than diesel or kerosene. Its lower boiling point range allows it to vaporize easily at ambient temperatures for spark ignition. Light hydr...
Q3. Which device does not qualify as an internal combustion engine___________________?
Show answer Hide answer
Answer: E. steam turbine
A steam turbine is classified as an external combustion engine because the working fluid is heated outside the turbine. Combustion takes place in a separate boiler furnace where heat is transferred to water to generate h...
Q4. During normal operation, cylinder wall interior surface temperatures are restricted from exceeding____________________?
Show answer Hide answer
Answer: C. 180°C
Cylinder wall temperatures are kept below approximately 180 degrees Celsius during normal operation. Exceeding this specific temperature threshold causes lubricating oil film breakdown and thermal stress. Effective cooli...
Q5. Diesel engine fuel ignition is initiated by___________________?
Show answer Hide answer
Answer: C. heat resulting from compressing air that is supplied for combustion
Diesel engines rely on the heat generated by rapidly compressing intake air to ignite fuel. The extreme compression ratio forces air temperature far above the autoignition point of diesel oil. No external electrical spar...
Q6. A refractory with high silicon content is classified as__________________?
Show answer Hide answer
Answer: C. neutral
Refractories with a high silica content are classified as acidic rather than neutral.