During normal operation, cylinder wall interior surface temperatures are restricted from exceeding____________________?
Show answer Hide answer
Answer: C. 180°C
Explanation
Cylinder wall temperatures are kept below approximately 180 degrees Celsius during normal operation. Exceeding this specific temperature threshold causes lubricating oil film breakdown and thermal stress. Effective cooling systems ensure the interior wall metal remains stable under harsh combustion heat. Engine lubricating oil loses its viscosity and protective film strength at elevated thermal limits. Cylinder walls experience intense heat transfer from the high-temperature combustion gases inside. Coolant passages and fins circulate heat away to maintain safe material operating temperatures.
Maintaining proper cylinder temperatures prevents catastrophic engine failures like piston seizure and scoring. Automotive cooling systems use water pumps and thermostats to regulate engine operating temperatures precisely. Overheating damages metal components and degrades engine oil, leading to rapid mechanical wear. Option A suggests 80 degrees Celsius, which is below typical operating temperatures for cylinder walls. Option B specifies 120 degrees Celsius, which is lower than the actual maximum safe wall threshold. Option D lists 240 degrees Celsius, which risks rapid lubricating oil breakdown and surface damage.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Which device does not qualify as an internal combustion engine___________________?
Show answer Hide answer
Answer: E. steam turbine
A steam turbine is classified as an external combustion engine because the working fluid is heated outside the turbine. Combustion takes place in a separate boiler furnace where heat is transferred to water to generate h...
Q2. Which solid fuel yields the highest calorific value : ___________?
Show answer Hide answer
Answer: D. Anthracite coal
Anthracite coal yields the highest calorific value among all naturally occurring solid fuel types. It represents the highest rank of coal with maximum fixed carbon content and minimum volatile matter. This dense chemical...
Q3. Diesel fuel oil volatility is characterized as_________________?
Show answer Hide answer
Answer: D. indicated by 90% distillation temperature, i.e., when 90% of sample oil has distilled off
Diesel fuel volatility is standardly quantified using laboratory distillation curves rather than simple flash points. The temperature at which ninety percent of the fuel sample distills off indicates its vaporization per...
Q4. A refractory with high silicon content is classified as__________________?
Show answer Hide answer
Answer: C. neutral
Refractories with a high silica content are classified as acidic rather than neutral.
Q5. If 850 kg of liquid occupies one cubic meter, 0.85 signifies its__________________?
Show answer Hide answer
Answer: C. specific gravity
Specific gravity is the dimensionless ratio of a substance density compared to the density of pure water. If one cubic meter of liquid weighs 850 kg, its density is 850 kg per cubic meter. Dividing this density by the de...
Q6. A four-stroke engine completes its working cycle in this many crankshaft revolutions___________________?
Show answer Hide answer
Answer: C. 2
A four-stroke engine completes its working cycle in exactly two full revolutions of the crankshaft. The four strokes consist of intake, compression, power, and exhaust occurring over 720 degrees of rotation. Each individ...