Compression stroke end-pressures and temperatures in petrol engines are on the order of___________________?
Show answer Hide answer
Answer: B. 6 – 12 kg/cm2 and 250 – 350°C
Explanation
Compression pressures and temperatures in petrol engines reach 6 to 12 kg/cm squared and 250 to 350°C. Keeping temperatures below auto-ignition limits prevents premature detonation or knock in spark-ignition engines. Moderate compression ratios are necessary to handle volatile gasoline fuel without causing pre-ignition. Petrol engines mix fuel and air before compression, making them vulnerable to auto-ignition if squeezed too hard. Compression end conditions determine the thermodynamic starting point for spark-initiated combustion. Unit conversions relate kg/cm squared pressure metrics to standard engineering pressure units.
Automotive spark-ignition engine design limits compression ratios based on available fuel octane ratings. Turbocharged petrol engines require intercoolers to keep end-compression temperatures within safe operational limits. Engine management systems monitor knock sensors to prevent damage from excessive cylinder pressures. Option A is incorrect because pressures and temperatures are slightly higher in typical operating petrol engines. Option C is incorrect because 12 to 20 kg/cm squared pressures cause severe knock with standard gasoline fuels. Option D is incorrect because 450 to 500°C temperatures would instantly auto-ignite standard petrol mixtures.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Gaseous fuel calorific values are quantified in terms of__________________?
Show answer Hide answer
Answer: D. kcal/m²
Gaseous fuel calorific values are typically quantified per unit volume, such as kilocalories per cubic meter. Measuring gas volume is far more practical in engineering applications than weighing compressible gas masses....
Q2. What volume of air is needed to burn 1 liter of fuel in a four-stroke engine_______________?
Show answer Hide answer
Answer: D. 9-10 m3
Stoichiometric calculations dictate that hydrocarbon liquid fuels require massive volumetric quantities of atmospheric oxygen. Burning one single liter of typical fuel oil demands roughly nine to ten cubic meters of air....
Q3. Indicated mean effective pressure derived from an engine indicator represents________________?
Show answer Hide answer
Answer: E. average pressure
Indicated mean effective pressure represents the theoretical average pressure acting on the piston. Multiplying this average pressure by displacement gives the total indicated work per power stroke. Option E correctly de...
Q4. Naturally occurring solid fuels include : ________?
Show answer Hide answer
Answer: D. All of above
Naturally occurring solid fuels include wood, peat, lignite, and various grades of coal. These geological and organic materials form over long periods through the decomposition of plant matter. Each of these solid fuels...
Q5. Petrol distillation takes place within this temperature range :
Show answer Hide answer
Answer: C. 65° to 220°
Petrol consists of a complex mixture of volatile hydrocarbons that vaporize within a specific thermal window. Fractional distillation of crude oil separates gasoline components between sixty-five and two hundred twenty d...
Q6. Compared to theoretical air requirements for complete combustion, starting a petrol engine demands air quantities that are___________________?
Show answer Hide answer
Answer: B. loss
Cold starting a petrol engine requires a fuel-rich mixture to compensate for poor fuel vaporization. A rich mixture supplies extra fuel so that enough vapor ignites near the spark plug electrodes. Option B correctly indi...