Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57402

Gaseous fuel calorific values are quantified in terms of__________________?

Select your answer for: Gaseous fuel calorific values are quantified in terms of__________________?
Show answer

Answer: D. kcal/m²

Explanation

Gaseous fuel calorific values are typically quantified per unit volume, such as kilocalories per cubic meter. Measuring gas volume is far more practical in engineering applications than weighing compressible gas masses. Standard temperature and pressure correction factors ensure accurate gaseous fuel energy content reporting. Higher and lower heating values for gases are determined using standard volumetric flow meter equipment. Natural gas composition variations affect its overall volumetric calorific heating value significantly. Combustion analysis laboratories report gaseous fuel energy density relative to standard cubic meter volumes.

Natural gas utility companies bill residential and industrial customers based on volumetric energy content. Power plant gas turbine burners require precise gas calorific monitoring to maintain stable firing rates. Boiler combustion efficiency calculations incorporate gaseous fuel volumetric heating value measurements. Kilocalories alone measure total heat units without accounting for the required fuel volume quantity. Kilocalories per kilogram apply predominantly to solid and liquid fuels rather than compressible gases. Area units like square meters represent surface heat flux rather than volumetric gas calorific density.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Scavenging air in diesel engines refers to___________________?

Select your answer for: Scavenging air in diesel engines refers to___________________?
Show answer

Answer: D. air used for forcing burnt gases out of engine’s cylinder during the exhaust period

Scavenging air forces burnt exhaust gases completely out of the cylinder during the exhaust phase. It prepares the combustion chamber to receive a fresh charge of clean air for the next cycle. Option D correctly describe...

Q2. A four-stroke internal combustion engine running at 1500 rpm drives its camshaft at__________________?

Select your answer for: A four-stroke internal combustion engine running at 1500 rpm drives its camshaft at__________________?
Show answer

Answer: B. 750 rpm

A four-stroke engine completes one power cycle every two full crankshaft revolutions. Its camshaft must open and close valves at half the frequency of the rotating crankshaft. Dividing the 1500 rpm crankshaft speed by tw...

Q3. Diesel engine knock is primarily caused by____________________?

Select your answer for: Diesel engine knock is primarily caused by____________________?
Show answer

Answer: A. instantaneous and rapid burning of the first part of the charge

Diesel knock is caused by rapid auto-ignition of accumulated fuel built up during the ignition delay. A large mass of fuel injected during the delay period burns almost instantaneously, causing sharp pressure spikes. Thi...

Q4. Indicated mean effective pressure derived from an engine indicator represents________________?

Select your answer for: Indicated mean effective pressure derived from an engine indicator represents________________?
Show answer

Answer: E. average pressure

Indicated mean effective pressure represents the theoretical average pressure acting on the piston. Multiplying this average pressure by displacement gives the total indicated work per power stroke. Option E correctly de...

Q5. Diesel engine output can be boosted without enlarging engine dimensions or speed by_________________?

Select your answer for: Diesel engine output can be boosted without enlarging engine dimensions or speed by_________________?
Show answer

Answer: E. supercharging

Supercharging increases the mass of air inducted into the cylinder during each intake stroke. This extra oxygen allows more fuel to be injected and burned without enlarging engine dimensions. Engine output is successfull...

Q6. Compression stroke end-pressures and temperatures in petrol engines are on the order of___________________?

Select your answer for: Compression stroke end-pressures and temperatures in petrol engines are on the order of___________________?
Show answer

Answer: B. 6 – 12 kg/cm2 and 250 – 350°C

Compression pressures and temperatures in petrol engines reach 6 to 12 kg/cm squared and 250 to 350°C. Keeping temperatures below auto-ignition limits prevents premature detonation or knock in spark-ignition engines. Mod...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test