Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57228

Steam temperatures near 540°C are typically measured using ____________________?

Select your answer for: Steam temperatures near 540°C are typically measured using ____________________?
Show answer

Answer: D. thermocouple

Explanation

Thermocouples are widely used for industrial temperature measurements around 540 degrees Celsius reliably. Specific alloy combinations allow thermocouples to withstand high steam environments without degrading rapidly. Their fast response time and robust electrical output make them ideal for power plant monitoring. A thermocouple generates a voltage proportional to the temperature gradient between two dissimilar metal junctions. Industrial steam systems operate under high pressure conditions requiring durable and accurate temperature sensors. Standard thermocouple types like chromel-alumel handle elevated temperatures common in modern thermal power plants.

Power generation facilities install thermocouples in superheated steam headers to monitor turbine inlet conditions. Chemical processing plants rely on thermocouple probes for continuous high temperature reactor control loops. Automotive exhaust testing utilizes specialized thermocouple probes to measure extreme engine operating temperatures. Option A is incorrect because standard liquid-in-glass thermometers cannot reliably measure 540 degree steam. Option B is incorrect because radiation pyrometers are typically reserved for much higher temperature measurements. Option C is incorrect because thermistors generally degrade or lose accuracy at such elevated temperatures.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Regenerator-type heat exchangers transfer heat through___________________?

Select your answer for: Regenerator-type heat exchangers transfer heat through___________________?
Show answer

Answer: C. flow of hot and cold fluids alternately over a surface

Regenerative heat exchangers operate by passing hot and cold fluids alternately over a solid thermal storage matrix. Hot fluid first flows through the matrix to deposit thermal energy into the solid storage material. Col...

Q2. Total emissive power is defined as the aggregate radiation emitted by a black body per unit_______________?

Select your answer for: Total emissive power is defined as the aggregate radiation emitted by a black body per unit_______________?
Show answer

Answer: D. time

Emissive power quantifies emitted thermal radiation relative to both physical surface area and operating time. Dividing total radiated energy by area and time yields the standard heat flux expression. Option D correctly...

Q3. A thermocouple's time constant is defined as_______________?

Select your answer for: A thermocouple's time constant is defined as_______________?
Show answer

Answer: C. the time taken to attain 63.2% of the value of initial temperature difference

The time constant of a thermocouple defines the duration required to reach 63.2 percent of an initial temperature step change. This mathematical percentage corresponds to one minus the reciprocal of Euler's constant in e...

Q4. The heat flux ratio Q1/Q2 through two equal-thickness walls with thermal conductivities ATj and 2K2 will be________________?

Select your answer for: The heat flux ratio Q1/Q2 through two equal-thickness walls with thermal conductivities ATj and 2K2 will be________________?
Show answer

Answer: C. 2

Heat flux through a flat wall is directly proportional to its thermal conductivity under equal temperature drops. Given equal wall thicknesses and temperature differences, the heat flux ratio equals the thermal conductiv...

Q5. Air has a Prandtl number roughly equal to _______________________?

Select your answer for: Air has a Prandtl number roughly equal to _______________________?
Show answer

Answer: C. 0.7

The Prandtl number for standard dry air at normal atmospheric conditions is approximately zero point seven. This dimensionless number relates momentum diffusivity to thermal diffusivity within fluid flow boundary layers....

Q6. The overall heat transfer coefficient is expressed in units of___________________?

Select your answer for: The overall heat transfer coefficient is expressed in units of___________________?
Show answer

Answer: C. kcal/m2 hr °C

The overall heat transfer coefficient accounts for thermal resistance across multiple material and fluid layers. Heat flux equals the coefficient multiplied by area and temperature difference across the system. Option C...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test