The overall heat transfer coefficient is expressed in units of___________________?
Show answer Hide answer
Answer: C. kcal/m2 hr °C
Explanation
The overall heat transfer coefficient accounts for thermal resistance across multiple material and fluid layers. Heat flux equals the coefficient multiplied by area and temperature difference across the system. Option C provides the correct dimensional units incorporating area, temperature difference, and time. Thermal resistance in heat exchangers includes convection films and solid wall conduction barriers. Standard metric units for the coefficient are watts per square meter kelvin or traditional thermal units. Reciprocal of the overall coefficient represents the total thermal resistance of the composite barrier.
HVAC engineers use the overall heat transfer coefficient to calculate building insulation performance. Designers of shell and tube heat exchangers rely on this coefficient to size equipment correctly. Fouling factors decrease the overall heat transfer coefficient over time in operating industrial systems. Option A lacks time and temperature dimensions required for a complete heat transfer coefficient. Option B misses the surface area term in the denominator of the standard unit expression. Options D and E contain incorrect dimensional exponents for area or volumetric flow scaling.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Steam temperatures near 540°C are typically measured using ____________________?
Show answer Hide answer
Answer: D. thermocouple
Thermocouples are widely used for industrial temperature measurements around 540 degrees Celsius reliably. Specific alloy combinations allow thermocouples to withstand high steam environments without degrading rapidly. T...
Q2. Moisture contamination will cause an insulator's thermal resistance to_________________?
Show answer Hide answer
Answer: B. decrease
Moisture fills the microscopic air pockets inside thermal insulation materials with liquid water. Liquid water possesses a much higher thermal conductivity than trapped static atmospheric air. Higher thermal conductivity...
Q3. The heat flux ratio Q1/Q2 through two equal-thickness walls with thermal conductivities ATj and 2K2 will be________________?
Show answer Hide answer
Answer: C. 2
Heat flux through a flat wall is directly proportional to its thermal conductivity under equal temperature drops. Given equal wall thicknesses and temperature differences, the heat flux ratio equals the thermal conductiv...
Q4. Gases generally exhibit thermal diffusivities that are_____________________?
Show answer Hide answer
Answer: A. more than those for liquids
Gases generally have higher thermal diffusivities than liquids due to their large kinematic viscosities. Molecular spacing in gases allows momentum to diffuse much faster relative to thermal energy storage. While liquid...
Q5. At 20°C, the thermal conductivity of water is on the scale of_____________________?
Show answer Hide answer
Answer: D. 0.51
The thermal conductivity of liquid water at room temperature is approximately 0.6 W/m K. Engineering unit conversions translate this value to roughly 0.51 kcal/hr m C. Experimental fluid measurements confirm this specifi...
Q6. High-temperature energy distribution for an ideal reflector mostly falls within the range of___________________?
Show answer Hide answer
Answer: A. shorter wavelength
Wien's displacement law proves that peak thermal radiation emission shifts toward shorter wavelengths at higher temperatures. High-temperature energy distribution concentrates significantly more radiative power into high...