Hydraulic turbines are alternatively referred to as : ___________?
Show answer Hide answer
Answer: B. water turbines
Explanation
Hydraulic turbines are commonly known as water turbines because they harness flowing water energy. Water serves as the primary working fluid driving the runner blades in hydroelectric installations. Kinetic and potential energy of water streams are converted into rotational mechanical work. Hydraulic energy conversion dates back centuries to traditional water wheels used for milling grain. Modern hydroelectric plants use massive hydraulic turbines connected to electrical generators. Water density and gravity provide the driving forces behind all hydraulic turbine power generation.
Dams across major rivers utilize large water turbines to generate renewable electrical power for grids. Pumped storage facilities use reversible hydraulic turbines for both water pumping and power generation. Civil engineering projects evaluate river flow rates to select appropriate water turbine installations. Option A is incorrect because steam turbines use high pressure vapor rather than liquid water flow. Option C is incorrect because combustion turbines burn compressed fuel gas mixtures internally. Option D is incorrect because gas turbines operate on high temperature combustion gas working fluids.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Reaction turbine discharge varies with increased unit speed by____________________?
Show answer Hide answer
Answer: B. decreases
In reaction turbines, fluid discharge decreases as the unit rotational speed increases under constant head. Centrifugal forces generated by the rotating runner create an opposing pressure head that restricts incoming flo...
Q2. Heat engines operate by utilizing_________________?
Show answer Hide answer
Answer: C. high heat value of oil
Heat engines base their thermodynamic energy calculations and fuel ratings on the high heat value of fuel. High heat value, also known as gross calorific value, includes the latent heat released by condensing water vapor...
Q3. Peak flame speed inside a diesel engine occurs at this air-fuel ratio_______________?
Show answer Hide answer
Answer: D. about 10% rich mixture
Peak flame speed and optimal combustion velocity in engines occur with slightly rich fuel mixtures. A fuel-rich mixture containing extra fuel provides faster chemical reaction kinetics during combustion. Option D correct...
Q4. Detonation in an internal combustion engine causes this parameter to spike_____________________?
Show answer Hide answer
Answer: B. rate of rise of pressure
Detonation in an internal combustion engine causes an extreme spike in the rate of pressure rise. Unburnt end-gas autoignites simultaneously, generating shockwaves that hammer combustion chamber walls. This abnormal comb...
Q5. Fluid entering and exiting axial flow fans and turbines does so in this manner________________?
Show answer Hide answer
Answer: C. axially, axially
In axial flow turbomachinery, fluid particles flow parallel to the axis of rotation throughout the entire device. The fluid enters the blades in a direction parallel to the main shaft without radial deflection. After pas...
Q6. Turbine specific speed is characterized as the rotational speed of a scaled unit___________________?
Show answer Hide answer
Answer: D. of such a size that it produces unit horse power with unit head
Turbine specific speed is defined as the rotational speed of a geometrically similar model unit. The model must be scaled to produce one horsepower under a standardized one unit head. Option D correctly defines turbine s...