Fluid entering and exiting axial flow fans and turbines does so in this manner________________?
Show answer Hide answer
Answer: C. axially, axially
Explanation
In axial flow turbomachinery, fluid particles flow parallel to the axis of rotation throughout the entire device. The fluid enters the blades in a direction parallel to the main shaft without radial deflection. After passing through the rotating blade passages, the fluid exits downstream still traveling in an axial direction. Axial flow fans and turbines are fundamental mechanical devices used widely in aerospace propulsion and power generation. The blade geometry is specifically engineered to impart or extract energy from fluids moving strictly parallel to the shaft. Unlike centrifugal machines, axial designs handle very high volume flow rates at relatively lower pressure ratios efficiently.
Radial entry and exit are characteristic of centrifugal compressors and inward-flow reaction turbines rather than axial machines. Mixed-flow devices combine both axial and radial velocity components, differing from pure axial flow behavior. Options describing mismatched flow paths violate the fundamental operating principles of single-stage axial turbo-machines.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. A stoichiometric air-fuel mixture is defined as______________________?
Show answer Hide answer
Answer: A. chemically correct mixture
A stoichiometric air-fuel mixture is defined as the chemically correct ratio required for complete fuel combustion. It contains exactly enough oxygen to burn all available hydrocarbon fuel without leaving excess unburnt...
Q2. Hydraulic turbines are alternatively referred to as : ___________?
Show answer Hide answer
Answer: B. water turbines
Hydraulic turbines are commonly known as water turbines because they harness flowing water energy. Water serves as the primary working fluid driving the runner blades in hydroelectric installations. Kinetic and potential...
Q3. Compared to a petrol engine at rated load, a diesel engine exhibits____________________?
Show answer Hide answer
Answer: A. more efficient
Diesel engines operate at higher compression ratios and lean mixtures, resulting in superior thermodynamic efficiency. Higher compression and expansion ratios allow diesel units to extract more mechanical work from each...
Q4. An engine indicator is employed to ascertain___________________?
Show answer Hide answer
Answer: D. m.e.p. and I.H.P.
An engine indicator is a mechanical or electronic instrument employed to determine mean effective pressure and indicated horsepower. It records continuous pressure versus volume traces inside the engine cylinder during o...
Q5. A 5 BHP engine operating at full load consumes diesel fuel approximately on the order of_________________?
Show answer Hide answer
Answer: B. 1 kg/hr
A small 5 BHP engine consumes fuel at a rate of approximately 1 kg per hour under load. Specific fuel consumption rates for small diesel engines average around 0.2 kg per brake horsepower hour. Multiplying 5 BHP by the s...
Q6. Combustion processes in compression-ignition engines are____________________?
Show answer Hide answer
Answer: B. heterogeneous
Combustion in compression ignition engines is heterogeneous because fuel is injected directly into compressed air spray pockets. The injected liquid fuel droplets must mix with air inside the cylinder before chemical rea...