Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57343

Turbine specific speed is characterized as the rotational speed of a scaled unit___________________?

Select your answer for: Turbine specific speed is characterized as the rotational speed of a scaled unit___________________?
Show answer

Answer: D. of such a size that it produces unit horse power with unit head

Explanation

Turbine specific speed is defined as the rotational speed of a geometrically similar model unit. The model must be scaled to produce one horsepower under a standardized one unit head. Option D correctly defines turbine specific speed based on unit power and unit head. Similitude principles allow engineers to test small turbine models to predict full-scale performance. Specific speed normalizes performance data across different turbine designs and operating conditions. Standard engineering units for specific speed vary depending on regional measurement systems.

Hydroelectric power plant designers use specific speed to select appropriate turbine runners. Turbine manufacturers classify all new runner designs using specific speed rating calculations. Cavitation limits are closely tied to the specific speed characteristics of chosen turbines. Options A, B, and C alter the standard definitions of power and head used in specific speed. Option E is incorrect because standard specific speed formulas are well established in engineering. Mixing power and discharge definitions incorrectly breaks down standard turbomachinery similitude laws.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Hydraulic turbines are alternatively referred to as : ___________?

Select your answer for: Hydraulic turbines are alternatively referred to as : ___________?
Show answer

Answer: B. water turbines

Hydraulic turbines are commonly known as water turbines because they harness flowing water energy. Water serves as the primary working fluid driving the runner blades in hydroelectric installations. Kinetic and potential...

Q2. Compared to a petrol engine at rated load, a diesel engine exhibits____________________?

Select your answer for: Compared to a petrol engine at rated load, a diesel engine exhibits____________________?
Show answer

Answer: A. more efficient

Diesel engines operate at higher compression ratios and lean mixtures, resulting in superior thermodynamic efficiency. Higher compression and expansion ratios allow diesel units to extract more mechanical work from each...

Q3. Detonation in an internal combustion engine causes this parameter to spike_____________________?

Select your answer for: Detonation in an internal combustion engine causes this parameter to spike_____________________?
Show answer

Answer: B. rate of rise of pressure

Detonation in an internal combustion engine causes an extreme spike in the rate of pressure rise. Unburnt end-gas autoignites simultaneously, generating shockwaves that hammer combustion chamber walls. This abnormal comb...

Q4. A 5 BHP engine operating at full load consumes diesel fuel approximately on the order of_________________?

Select your answer for: A 5 BHP engine operating at full load consumes diesel fuel approximately on the order of_________________?
Show answer

Answer: B. 1 kg/hr

A small 5 BHP engine consumes fuel at a rate of approximately 1 kg per hour under load. Specific fuel consumption rates for small diesel engines average around 0.2 kg per brake horsepower hour. Multiplying 5 BHP by the s...

Q5. Combustion processes in compression-ignition engines are____________________?

Select your answer for: Combustion processes in compression-ignition engines are____________________?
Show answer

Answer: B. heterogeneous

Combustion in compression ignition engines is heterogeneous because fuel is injected directly into compressed air spray pockets. The injected liquid fuel droplets must mix with air inside the cylinder before chemical rea...

Q6. Centrifugal pumps achieve peak efficiency when their impeller blades are_________________?

Select your answer for: Centrifugal pumps achieve peak efficiency when their impeller blades are_________________?
Show answer

Answer: C. bent backward

Centrifugal pumps achieve peak hydraulic efficiency and stable performance when their impeller blades curve backward. Backward curved blades produce a drooping head-capacity characteristic that prevents flow surging inst...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test