What is the volumetric efficiency of a clearance-free compressor________________?
Show answer Hide answer
Answer: C. is not dependent upon compressin ratio
Explanation
In a theoretical clearance-free compressor all trapped air is expelled during the discharge stroke completely. This complete expulsion eliminates the re-expansion of residual clearance gases during the subsequent intake stroke. Consequently the volumetric efficiency remains constant at one hundred percent regardless of the compression ratio. Real compressors require physical clearance between the piston and cylinder head to prevent mechanical collision. Clearance volume traps high-pressure gas that must re-expand before fresh air can enter the cylinder. Compression ratio defines the ratio of total cylinder volume to the clearance volume at top dead center.
Theoretical models like the clearance-free compressor help engineering students understand baseline thermodynamic limits. Real reciprocating compressors suffer reduced volumetric efficiency at higher pressure ratios due to clearance effects. Compressor design optimization focuses on minimizing clearance spaces to improve volumetric output in industry. Option A is incorrect because volumetric efficiency never increases with higher compression ratios in real machines. Option B describes real compressors with clearance volumes rather than the ideal clearance-free compressor model. Option D and E are wrong because the behavior of an ideal clearance-free compressor is completely predictable.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. How does gas turbine thermal efficiency compare against stationary diesel power plants__________________?
Show answer Hide answer
Answer: C. less
Simple-cycle gas turbines generally achieve lower peak thermal efficiencies compared to large stationary diesel engines. Diesel power plants benefit from extremely high compression ratios that yield superior thermodynami...
Q2. Compressor volumetric efficiency degrades by roughly what amount per 100 m elevation gain___________________?
Show answer Hide answer
Answer: C. 1.0%
Higher elevation decreases ambient air density and atmospheric pressure significantly. Lower air density reduces the mass of air entering the compressor cylinder. Volumetric efficiency degrades by approximately one perce...
Q3. Branch piping connections off main compressed air headers should originate where to prevent moisture contamination_________________?
Show answer Hide answer
Answer: A. top side of main
Branch lines should always connect to the top side of main compressed air headers to prevent accumulated condensation and moisture at the bottom from flowing into the branch. Condensate naturally separates from compresse...
Q4. The circulating working medium utilized within closed air turbines is___________________?
Show answer Hide answer
Answer: C. in a single phase
Closed-cycle air turbines rely on a working fluid that stays in a gaseous phase throughout operation. Air does not undergo phase change inside the closed loop of this specific thermodynamic power cycle. Maintaining a sin...
Q5. Practical volumetric efficiencies for industrial air compressors typically run on the order of________________?
Show answer Hide answer
Answer: D. 70-90%
Industrial reciprocating air compressors experience unavoidable losses like clearance expansion. Valve throttling and heat transfer further reduce the ideal intake air volume. Practical operating efficiencies for well-ma...
Q6. Water injection is integrated into gas turbine cycles in order to___________________?
Show answer Hide answer
Answer: B. control output of turbine
Water injection into gas turbines is utilized to increase mass flow and control or boost the power output of the turbine. Injecting liquid water into the combustion chamber or compressor discharge causes it to flash into...