Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 56986

Branch piping connections off main compressed air headers should originate where to prevent moisture contamination_________________?

Select your answer for: Branch piping connections off main compressed air headers should originate where to prevent moisture contamination_________________?
Show answer

Answer: A. top side of main

Explanation

Branch lines should always connect to the top side of main compressed air headers to prevent accumulated condensation and moisture at the bottom from flowing into the branch. Condensate naturally separates from compressed air and flows along the bottom interior surface of horizontal distribution headers. Tapping into the upper portion of the pipe ensures that only dry air enters the secondary branch piping network. Compressed air leaving aftercoolers still contains residual moisture that condenses as the air cools in distribution piping. Main headers are intentionally installed with slight downward slopes to direct accumulated liquid toward designated drain traps. Proper piping geometry prevents water slugs from damaging downstream pneumatic equipment and precision control valves.

Connecting branch lines to the bottom side of the main would channel accumulated liquid directly into the secondary piping. Left or right side connections still risk drawing liquid if the condensate level rises above the midpoint of the pipe. Allowing arbitrary connection locations would inevitably lead to severe moisture contamination in downstream pneumatic equipment.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Which material characteristic is most vital for gas turbine blade applications___________________?

Select your answer for: Which material characteristic is most vital for gas turbine blade applications___________________?
Show answer

Answer: C. creep

Gas turbine blades operate under high centrifugal stress at elevated temperatures making creep resistance vital. Creep causes permanent plastic deformation of metal components under prolonged mechanical stress at high th...

Q2. Turboprop propulsion systems incorporate which distinct feature not found in basic turbojets __________________?

Select your answer for: Turboprop propulsion systems incorporate which distinct feature not found in basic turbojets __________________?
Show answer

Answer: A. peopeller

Turboprop propulsion systems incorporate a mechanical propeller driven through a reduction gearbox by the gas turbine core. Basic turbojets rely exclusively on high-velocity exhaust gas reaction thrust without utilizing...

Q3. How does gas turbine thermal efficiency compare against stationary diesel power plants__________________?

Select your answer for: How does gas turbine thermal efficiency compare against stationary diesel power plants__________________?
Show answer

Answer: C. less

Simple-cycle gas turbines generally achieve lower peak thermal efficiencies compared to large stationary diesel engines. Diesel power plants benefit from extremely high compression ratios that yield superior thermodynami...

Q4. What is the volumetric efficiency of a clearance-free compressor________________?

Select your answer for: What is the volumetric efficiency of a clearance-free compressor________________?
Show answer

Answer: C. is not dependent upon compressin ratio

In a theoretical clearance-free compressor all trapped air is expelled during the discharge stroke completely. This complete expulsion eliminates the re-expansion of residual clearance gases during the subsequent intake...

Q5. What characterizes the volumetric efficiency of a compressor possessing clearance volume ________________?

Select your answer for: What characterizes the volumetric efficiency of a compressor possessing clearance volume ________________?
Show answer

Answer: B. decreases with increase in compression ratio

Clearance volume traps high-pressure gas that must expand during the suction stroke before fresh air can enter. As compression ratios increase, more of the stroke is wasted re-expanding the trapped clearance gas. This re...

Q6. The circulating working medium utilized within closed air turbines is___________________?

Select your answer for: The circulating working medium utilized within closed air turbines is___________________?
Show answer

Answer: C. in a single phase

Closed-cycle air turbines rely on a working fluid that stays in a gaseous phase throughout operation. Air does not undergo phase change inside the closed loop of this specific thermodynamic power cycle. Maintaining a sin...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test