Total heat is defined as the thermal energy required to__________________?
Show answer Hide answer
Answer: D. convert water into steam and superheat it
Explanation
Total heat or enthalpy represents the complete energy required to transform liquid into superheated steam. It encompasses sensible heat of water, latent heat of vaporization, and superheating energy. Option D correctly specifies the entire process of water vaporization and subsequent superheating. Steam tables provide total heat values referenced from a baseline zero temperature state. Superheated steam contains higher thermal energy than saturated steam at the same pressure level. Enthalpy calculations are fundamental to thermodynamic cycles used in thermal power generation.
Power plant steam generators must supply total heat to drive high pressure steam turbines. Industrial processes use superheated steam because its higher enthalpy prevents moisture condensation. Boiler efficiency testing relies on accurate measurement of total heat added to working fluids. Options A and B cover only phase change without including initial heating or superheating. Option C describes sensible heating alone without accounting for phase transformation enthalpy. Option E stops at dry saturated steam and omits the final superheating energy stage.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Francis, Kaplan, and propeller turbines are classified under___________________?
Show answer Hide answer
Answer: B. Reaction turbines
Francis, Kaplan, and propeller turbines are all classified as reaction turbines during operation. In reaction turbines, water pressure drops across the moving runner blades while flowing through them. Both pressure energ...
Q2. The head generated by a centrifugal pump is a function of___________________?
Show answer Hide answer
Answer: E. A. and B. above
Centrifugal pump head generation depends directly on impeller diameter and rotational speed. Euler turbo machine equations prove that peripheral velocity determines maximum developed head. Both physical size and rotation...
Q3. At room temperature, air thermal conductivity in kcal/m hr °C is on the order of__________________?
Show answer Hide answer
Answer: B. 0.02
At standard room temperature, the thermal conductivity of air is approximately 0.02 kcal per meter hour degree Celsius. This low thermal conductivity confirms that stationary air acts as a very effective natural thermal...
Q4. If a pump handling water delivers flow Q at constant total dynamic head requiring specific B.H.P., what discharge is expected when pumping a fluid with 0.75 specific gravity and similar viscosity_____________________?
Show answer Hide answer
Answer: A. same quantity of liquid
A centrifugal pump delivers a constant volumetric capacity regardless of the liquid specific gravity. Volumetric displacement depends entirely on impeller geometry and rotational speed, not fluid density. Provided viscos...
Q5. A slight reduction in the capacity rating of a constant-speed single casing multistage pump can be achieved by_______________?
Show answer Hide answer
Answer: B. trimming the impeller size to the required size by machining
Trimming the outer diameter of a centrifugal impeller reduces its peripheral tip speed. A smaller tip speed decreases the energy imparted to the fluid, lowering pump capacity. Machining the impeller provides a reliable m...
Q6. Maximum impulse generation in a hydraulic ram occurs when___________________?
Show answer Hide answer
Answer: A. waste valve closes suddenly
Maximum impulse generation in a hydraulic ram occurs when the waste valve suddenly snaps shut. Rapid valve closure arrests moving column momentum instantly, producing a massive water hammer pressure spike. This high-pres...