Francis, Kaplan, and propeller turbines are classified under___________________?
Show answer Hide answer
Answer: B. Reaction turbines
Explanation
Francis, Kaplan, and propeller turbines are all classified as reaction turbines during operation. In reaction turbines, water pressure drops across the moving runner blades while flowing through them. Both pressure energy and kinetic energy are converted into mechanical work within the runner assembly. Hydraulic turbines are categorized primarily into impulse types and reaction types based on energy transfer. Francis turbines are mixed flow reaction machines, while Kaplan and propeller units are axial flow. Reaction turbines operate completely submerged in water within a closed casing or scroll case.
Low to medium head hydroelectric plants utilize Kaplan and Francis reaction turbines for high efficiency. Dam installations rely on reaction turbines to harness large water volume flow rates effectively. Civil engineers select turbine types based on available site head and volumetric water discharge data. Option A is incorrect because impulse turbines like Pelton wheels convert all energy before the runner. Option C is incorrect because axial flow describes runner geometry rather than the fundamental reaction class. Option D is incorrect because mixed flow describes Francis runners while Kaplan units are purely axial.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Water exiting the impeller inside a centrifugal pump casing follows a flow that is___________________?
Show answer Hide answer
Answer: C. free vortex motion
Water exiting a centrifugal pump impeller enters the volute casing and exhibits free vortex motion behavior. In a free vortex, fluid particles maintain constant angular momentum as they spiral outward into the casing. Th...
Q2. Fluid enters a centrifugal pump inlet__________________?
Show answer Hide answer
Answer: C. at the center
Fluid enters a standard centrifugal pump axially through the intake nozzle directly at the center of the impeller. This central entry point is commonly referred to as the eye of the rotating pump impeller. From the cente...
Q3. Water exiting the centrifugal pump casing flows towards_______________?
Show answer Hide answer
Answer: E. vortex
Water exiting a centrifugal pump impeller enters the volute casing and forms a swirling pattern. This rotational fluid motion inside the scroll-shaped casing resembles a vortex flow regime. Option E accurately names vort...
Q4. At room temperature, air thermal conductivity in kcal/m hr °C is on the order of__________________?
Show answer Hide answer
Answer: B. 0.02
At standard room temperature, the thermal conductivity of air is approximately 0.02 kcal per meter hour degree Celsius. This low thermal conductivity confirms that stationary air acts as a very effective natural thermal...
Q5. A pump featuring a high specific speed is typically_____________________?
Show answer Hide answer
Answer: C. axial flow pump
Axial flow pumps operate at high specific speeds, making them ideal for high-capacity and low-head applications. The fluid flows parallel to the axis of the rotating propeller blades in these high-specific-speed machines...
Q6. Total heat is defined as the thermal energy required to__________________?
Show answer Hide answer
Answer: D. convert water into steam and superheat it
Total heat or enthalpy represents the complete energy required to transform liquid into superheated steam. It encompasses sensible heat of water, latent heat of vaporization, and superheating energy. Option D correctly s...