Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57294

Fluid enters a centrifugal pump inlet__________________?

Select your answer for: Fluid enters a centrifugal pump inlet__________________?
Show answer

Answer: C. at the center

Explanation

Fluid enters a standard centrifugal pump axially through the intake nozzle directly at the center of the impeller. This central entry point is commonly referred to as the eye of the rotating pump impeller. From the center, spinning blades fling the fluid outward radially into the volute casing. Centrifugal pumps rely on rotational momentum to accelerate liquids outward from the center to the periphery. The eye of the impeller is designed with smooth curvature to minimize flow separation and entrance losses. Suction piping directs liquid straight into the center inlet opening without sudden directional turns.

Proper alignment of suction piping prevents uneven flow distribution into the center impeller inlet. Clogged suction strainers can restrict fluid entering the pump center, leading to cavitation damage. Maintenance technicians inspect the impeller eye regularly for wear and blockage during pump overhauls. Entering at the top would create uneven flow distribution and unbalanced radial forces on the impeller. Entering at the bottom would cause swirling patterns and air pockets before reaching the spinning blades. Entering from the sides is incorrect because axial center entry is standard for centrifugal pump designs.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Reciprocating pumps employ air chambers to__________________?

Select your answer for: Reciprocating pumps employ air chambers to__________________?
Show answer

Answer: B. reduce acceleration to minimum

Air chambers fitted to reciprocating pumps absorb pressure pulsations and reduce fluid acceleration to a minimum. This dampening action eliminates violent pressure spikes in the piping network caused by piston velocity c...

Q2. Load fluctuations in a turbine are compensated by modifying which parameter______________?

Select your answer for: Load fluctuations in a turbine are compensated by modifying which parameter______________?
Show answer

Answer: D. flow

Load fluctuations in hydraulic turbines are compensated by regulating the water flow rate precisely. Governor systems adjust wicket gates or nozzles to alter flow capacity matching electrical power demand. Modulating the...

Q3. Kaplan turbine blade design based on aerofoil theory defines the guide angle as the angle between_________________?

Select your answer for: Kaplan turbine blade design based on aerofoil theory defines the guide angle as the angle between_________________?
Show answer

Answer: A. lift and resultant force

Aerofoil theory analyzes blade forces by resolving lift and drag vectors relative to flow. The guide angle in Kaplan turbine design is defined between lift and resultant forces. Vector resolution of hydrodynamic forces o...

Q4. Which air property fails to increase alongside temperature________________?

Select your answer for: Which air property fails to increase alongside temperature________________?
Show answer

Answer: C. density

Air density decreases with an increase in temperature due to thermal expansion and molecular spacing. As thermal energy increases, gas molecules spread apart, causing a given mass of air to occupy a larger volume. Unlike...

Q5. Francis, Kaplan, and propeller turbines are classified under___________________?

Select your answer for: Francis, Kaplan, and propeller turbines are classified under___________________?
Show answer

Answer: B. Reaction turbines

Francis, Kaplan, and propeller turbines are all classified as reaction turbines during operation. In reaction turbines, water pressure drops across the moving runner blades while flowing through them. Both pressure energ...

Q6. The head generated by a centrifugal pump is a function of___________________?

Select your answer for: The head generated by a centrifugal pump is a function of___________________?
Show answer

Answer: E. A. and B. above

Centrifugal pump head generation depends directly on impeller diameter and rotational speed. Euler turbo machine equations prove that peripheral velocity determines maximum developed head. Both physical size and rotation...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test