At room temperature, air thermal conductivity in kcal/m hr °C is on the order of__________________?
Show answer Hide answer
Answer: B. 0.02
Explanation
At standard room temperature, the thermal conductivity of air is approximately 0.02 kcal per meter hour degree Celsius. This low thermal conductivity confirms that stationary air acts as a very effective natural thermal insulator. Molecular collision rates in atmospheric gases restrict rapid conductive heat transfer across small spatial gaps. Gaseous thermal conductivity increases slightly with absolute temperature due to faster molecular velocities. Engineering unit conversions link metric thermal conductivity scales to standard international watt units. Stagnant air pockets trapped within porous materials provide the primary insulation value in modern building products.
Double-pane glass windows trap a thin layer of dry air or gas to minimize conductive heat loss. Building insulation batts rely on millions of microscopic trapped air pockets to resist winter heat transfer. Appliance manufacturers inject insulating foam containing trapped gas bubbles to improve refrigerator energy ratings. Values like 0.002 underestimate air conductivity and correspond poorly to experimental gas kinetic data. Higher figures such as 0.1 or 0.5 represent typical thermal conductivities of liquids or dense solid materials. Air is a poor heat conductor compared to metals and liquids, making low numerical values correct.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Water exiting the centrifugal pump casing flows towards_______________?
Show answer Hide answer
Answer: E. vortex
Water exiting a centrifugal pump impeller enters the volute casing and forms a swirling pattern. This rotational fluid motion inside the scroll-shaped casing resembles a vortex flow regime. Option E accurately names vort...
Q2. Which air property fails to increase alongside temperature________________?
Show answer Hide answer
Answer: C. density
Air density decreases with an increase in temperature due to thermal expansion and molecular spacing. As thermal energy increases, gas molecules spread apart, causing a given mass of air to occupy a larger volume. Unlike...
Q3. Francis, Kaplan, and propeller turbines are classified under___________________?
Show answer Hide answer
Answer: B. Reaction turbines
Francis, Kaplan, and propeller turbines are all classified as reaction turbines during operation. In reaction turbines, water pressure drops across the moving runner blades while flowing through them. Both pressure energ...
Q4. Total heat is defined as the thermal energy required to__________________?
Show answer Hide answer
Answer: D. convert water into steam and superheat it
Total heat or enthalpy represents the complete energy required to transform liquid into superheated steam. It encompasses sensible heat of water, latent heat of vaporization, and superheating energy. Option D correctly s...
Q5. Impulse turbines are typically installed______________________?
Show answer Hide answer
Answer: B. little above the tail race
Impulse turbines like the Pelton wheel must be installed slightly above the tailrace to ensure free jet discharge. Placing the runner above the water level prevents submergence, which would disrupt the atmospheric air je...
Q6. If a pump handling water delivers flow Q at constant total dynamic head requiring specific B.H.P., what discharge is expected when pumping a fluid with 0.75 specific gravity and similar viscosity_____________________?
Show answer Hide answer
Answer: A. same quantity of liquid
A centrifugal pump delivers a constant volumetric capacity regardless of the liquid specific gravity. Volumetric displacement depends entirely on impeller geometry and rotational speed, not fluid density. Provided viscos...