Impulse turbines are typically installed______________________?
Show answer Hide answer
Answer: B. little above the tail race
Explanation
Impulse turbines like the Pelton wheel must be installed slightly above the tailrace to ensure free jet discharge. Placing the runner above the water level prevents submergence, which would disrupt the atmospheric air jet action. This elevation ensures that buckets discharge water cleanly without suffering hydrodynamic interference from tailwater pools. Impulse turbines convert potential energy into high speed kinetic energy through stationary nozzles before impact. The working fluid remains at atmospheric pressure throughout the entire bucket energy transfer process. Tailrace clearance is a critical design parameter for maximizing hydraulic efficiency in run-of-river installations.
Hydroelectric power plants featuring Pelton wheels require precise vertical alignment relative to tailrace levels. Preventing tailwater submergence avoids unnecessary windage losses and mechanical drag on turbine buckets. Civil engineers design powerhouse foundations to maintain safe operating clearance above maximum flood tailwaters. Installing impulse turbines at exact tailrace level risks accidental submergence during high water discharge events. Placing impulse turbines below the tailrace converts them into flooded reaction units, violating operating principles. Setting reaction turbines 2.5 meters below tailrace aims to prevent cavitation, but this does not apply to impulse wheels.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The head generated by a centrifugal pump is a function of___________________?
Show answer Hide answer
Answer: E. A. and B. above
Centrifugal pump head generation depends directly on impeller diameter and rotational speed. Euler turbo machine equations prove that peripheral velocity determines maximum developed head. Both physical size and rotation...
Q2. At room temperature, air thermal conductivity in kcal/m hr °C is on the order of__________________?
Show answer Hide answer
Answer: B. 0.02
At standard room temperature, the thermal conductivity of air is approximately 0.02 kcal per meter hour degree Celsius. This low thermal conductivity confirms that stationary air acts as a very effective natural thermal...
Q3. A pump featuring a high specific speed is typically_____________________?
Show answer Hide answer
Answer: C. axial flow pump
Axial flow pumps operate at high specific speeds, making them ideal for high-capacity and low-head applications. The fluid flows parallel to the axis of the rotating propeller blades in these high-specific-speed machines...
Q4. A slight reduction in the capacity rating of a constant-speed single casing multistage pump can be achieved by_______________?
Show answer Hide answer
Answer: B. trimming the impeller size to the required size by machining
Trimming the outer diameter of a centrifugal impeller reduces its peripheral tip speed. A smaller tip speed decreases the energy imparted to the fluid, lowering pump capacity. Machining the impeller provides a reliable m...
Q5. Maximum impulse generation in a hydraulic ram occurs when___________________?
Show answer Hide answer
Answer: A. waste valve closes suddenly
Maximum impulse generation in a hydraulic ram occurs when the waste valve suddenly snaps shut. Rapid valve closure arrests moving column momentum instantly, producing a massive water hammer pressure spike. This high-pres...
Q6. A reciprocating pump indicator diagram plots________________?
Show answer Hide answer
Answer: B. pressure in cylinder vs swept volume
A reciprocating pump indicator diagram graphically plots instantaneous cylinder pressure against piston swept volume. The enclosed area of this diagnostic graph represents the actual mechanical work done by the pump pist...