A pump featuring a high specific speed is typically_____________________?
Show answer Hide answer
Answer: C. axial flow pump
Explanation
Axial flow pumps operate at high specific speeds, making them ideal for high-capacity and low-head applications. The fluid flows parallel to the axis of the rotating propeller blades in these high-specific-speed machines. Specific speed categorizes turbomachinery geometry based on operational flow, head, and rotational speed. Specific speed is a dimensionless index used by engineers to select the appropriate pump type for a system. Axial flow pumps resemble marine ship propellers enclosed inside a cylindrical discharge pipe casing. Radial centrifugal pumps operate at lower specific speeds, while mixed flow pumps occupy intermediate ranges.
Large-scale agricultural drainage and flood control projects rely on high-specific-speed axial flow pumps. Power plant cooling water systems utilize axial flow pumps to move massive water volumes at low heads. Selecting the correct specific speed pump prevents operational instability and premature mechanical wear. Centrifugal pumps feature lower specific speeds tailored for medium to high head lifting applications. Mixed flow pumps handle intermediate specific speeds bridging radial and axial hydraulic designs. Stating any of the above is wrong because only axial flow pumps specifically feature high specific speeds.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Which air property fails to increase alongside temperature________________?
Show answer Hide answer
Answer: C. density
Air density decreases with an increase in temperature due to thermal expansion and molecular spacing. As thermal energy increases, gas molecules spread apart, causing a given mass of air to occupy a larger volume. Unlike...
Q2. Francis, Kaplan, and propeller turbines are classified under___________________?
Show answer Hide answer
Answer: B. Reaction turbines
Francis, Kaplan, and propeller turbines are all classified as reaction turbines during operation. In reaction turbines, water pressure drops across the moving runner blades while flowing through them. Both pressure energ...
Q3. The head generated by a centrifugal pump is a function of___________________?
Show answer Hide answer
Answer: E. A. and B. above
Centrifugal pump head generation depends directly on impeller diameter and rotational speed. Euler turbo machine equations prove that peripheral velocity determines maximum developed head. Both physical size and rotation...
Q4. Impulse turbines are typically installed______________________?
Show answer Hide answer
Answer: B. little above the tail race
Impulse turbines like the Pelton wheel must be installed slightly above the tailrace to ensure free jet discharge. Placing the runner above the water level prevents submergence, which would disrupt the atmospheric air je...
Q5. If a pump handling water delivers flow Q at constant total dynamic head requiring specific B.H.P., what discharge is expected when pumping a fluid with 0.75 specific gravity and similar viscosity_____________________?
Show answer Hide answer
Answer: A. same quantity of liquid
A centrifugal pump delivers a constant volumetric capacity regardless of the liquid specific gravity. Volumetric displacement depends entirely on impeller geometry and rotational speed, not fluid density. Provided viscos...
Q6. A slight reduction in the capacity rating of a constant-speed single casing multistage pump can be achieved by_______________?
Show answer Hide answer
Answer: B. trimming the impeller size to the required size by machining
Trimming the outer diameter of a centrifugal impeller reduces its peripheral tip speed. A smaller tip speed decreases the energy imparted to the fluid, lowering pump capacity. Machining the impeller provides a reliable m...